Latest HPE6-A44 Practice Tests with Actual Questions

Get Complete pool of questions with Premium PDF and Test Engine

Exam Code : HPE6-A44
Exam Name : Aruba Certified Mobility Professional (ACMP) V8
Vendor Name :
"HP"

Download Full Version of HPE6-A44

---

HPE6-A44 Dumps HPE6-A44 Braindumps

HPE6-A44 Real Questions HPE6-A44 Practice Test HPE6-A44 Actual Questions

killexams.com

HP

HPE6-A44

Aruba Certified Mobility Professional (ACMP) V8

https://killexams.com/pass4sure/exam-detail/HPE6-A44

Question: 137

A company has a wireless network that contains a cluster of four Aruba 7030 Mobility Controllers (MC) managed by a Mobility Master (MM) located in the data center. The company has Aps deployed that are nearing the capacity of the cluster. The administrator wants to increase AP capacity.

How can the administrator solve the problem?

1. Add a new controller to the Mobility Master.

2. Add a Virtual Mobility Controller to the existing cluster.

3. Add a 7030 controller to the existing cluster.

4. Add a 7220 controller to the existing cluster.

Answer: B

Question: 138

An Administrator supports a group of employees that connect to the corporate office using the VIA client. An Aruba Mobility Controller (MC), behind a corporate firewall, terminates the user’s VPN sessions. The VPN sessions fail to establish because of the existing firewall rules.

Which connections must the administrator allow on the firewall? (Choose three.)

1. UDP 8202

2. UDP 4500

3. UDP 8211

4. TCP 4443

5. TCP 443

6. UDP 500

Answer: ABE
Question: 139 Refer to the exhibit.

What is true about the configuration shown in the exhibit?

1. This is an ArubaOS-Switch configured for per-user tunneled node.

2. This is an ArubaOS controller configured for per-user tunneled node.

3. This is an ArubaOS-Switch configured for per-port tunneled node.

4. This is an ArubaOS controller configured for per-user tunneled node.

Answer: C

Question: 140

Which license type must an administrator purchase to use Spectrum Monitoring?

1. RFP

2. VMC

3. PEFV

4. PEFNG

Answer: A

Reference: http://community.arubanetworks.com/t5/Wireless-Access/license-requirements-air-monitor-spectrum-monitor/td-p/243832

Question: 141

A company opens a new branch office and a RAP is used to connect to a corporate office Aruba Mobility Controller (MC). The company needs to provide connectivity to the office across the street. There is an AP across the street. However, there is no wired connectivity between the buildings. Which actions can the administrator select to provide the required connectivity? (Choose two.)

1. Provision all Aps at the branch office as Mesh Points.

2. Provision all Aps at the branch offices as Mash Portals.

3. Implement one of the Aps as a Mesh Point.

4. Provision the RAP as a Mesh Portal.

5. Implement two mesh clusters.

Answer: AD

Question: 142

A customer uses an SIP application that is not supported by Aruba United Communications and Collaboration (UCC). Which voice deployment mode should the administrator implement on Aruba Mobility Controllers (MCs) to support this application?

1. Heuristic mode

2. SDN-API mode

3. QoS-mode

4. WMM-only mode

Answer: A

Question: 143

An administrator implements a ClearPass solution to authenticate Aruba wireless users. The Aruba wireless solution is an ArubaOS 8.x Mobility Master (MM) deployment. ClearPass sends an Aruba VSA role name for an authenticated user. However, the administrator notices that the role assigned to the user is different from the one assigned by the ClearPass server.

Which two items should the administrator verify that might be the cause of this problem? (Choose two.)

1. Enablement of user roles on the controller

2. Spelling of the role on the ClearPass server

3. Server-derived role assignment on the ClearPass server

4. Role existence on the Managed Network

5. Order assignment that the controller uses to select a user role

Answer: BD

Question: 144

An administrator has a cluster of Aruba Mobility Controllers (MCs). The administrator wants to manually reboot one of the controllers. Before rebooting, which command should the administrator use to move the APs?

1. apmove

2. lc-cluster move ap

3. active-ap-rebalance

4. active-ap-lb

Answer: B

Question: 145

Which Aruba Unified Communications and Collaboration (UCC) deployment mode should be used when UCC is disabled on the Mobility Controllers

(MCs)?

1. Heuristics mode

2. WMM mode

3. ALG mode

4. SDN-API mode

Answer: B

Question: 146

An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.202.181. The administrator accesses an AP associated with this cluster, reboots it and accesses apboot mode. The administrator executes the printenv command. Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?

1. Nodelist

2. Servername

3. Master_ip

4. Cfg_lms

Answer: A

https://www.arubanetworks.com/assets/atmosphere/2018-Airheads/Fundamentals%20Guide%20-%20ArubaOS%208%20Fundamentals.pdfPage 89 QUESTIO

Question: 147

A VIA client tries to initially connect to corporate office controller through an intermediate firewall. However, the VPN connection fails. The administrator examines the firewall rules and determines that rules for UDP 4500 and UDP 500 are configured.

Which additional protocol must be allowed in the firewall rules to resolve this connection failure?

1. TCP 22

2. TCP 443

3. UDP 8200

4. ESP

Answer: D
Question: 148 Refer to the exhibit.

What can be determined from the command output shown in the exhibit?

1. The synchronized data is protected by VRRP.

2. The command was executed on the standby Mobility Master (MM).

3. The synchronization period is at its default value.

4. The other Mobility Master (MM) is the active license server.

Answer: D
Question: 149 Refer to the exhibit.

An administrator supports a RAP at a branch office shown in the exhibit. The company has one Mobility Controller (MC) at the Primary DMZ site and one at the Secondary DMZ site. The RAP is configured to connect to only the MC at the Primary DMZ site. A network outage with the ISP at the

Primary DMX site causes the RAP to reboot. Upon reboot, the RAP cannot build a tunnel to the Secondary DMZ site MC because the administrator forgot to add the Second LMS IP address to the AP Group configuration. Once the RAP can successfully connect, the administrator can add the Secondary DMZ MC as a backup LMS to fix the AP Group.

What should the administrator implement to allow the RAP to connect to the MC at the Secondary DMZ site while the outage at the primary site persists?

1. Dynamic discovery through DHCP Option 43

2. Static configuration from apboot mode

3. Dynamic discovery through DHCP Option 60

4. Dynamic discovery through multicast ADP

Answer: A

Question: 150

An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs). Which role should be assigned to an administrator who needs to only generate reports and monitor WLANS and ports?

1. Location-api-management

2. Network-operations

3. Root

4. AP-provisioning

Answer: B

User: Heloísa***** Studying for the aruba certified mobility professional (acmp) v8 exam was challenging due to the difficulty level of the topics. However, Killexams.com gave me the self-confidence to pass the exam by providing me with exact questions on the problem. As a result, I was able to pass the exam with a good percentage of 84%. Despite the twisted questions, the answers from Killexams.com helped me mark the right answers.

User: Nastashi***** I had trouble finding material online that perfectly explained only the essential things I needed for this specific topic. But when I found Killexams.com brain practice test material, I was surprised at how well it covered only the essential things without overwhelming me with too much information. I am thrilled to have found and used it for my preparation.

User: Nika***** Though it is said that few can bring about change, they can recognize those who have. I aspire to make my own mark in the world and be recognized for my achievements. Previously, I struggled in my studies, but with the help of Killexams.com, I was able to pass my HPE6-A44 exam and take the first step towards achieving this goal.

User: Lieve***** I had a superb experience with the killexams.com team, who guided me a lot towards my progress. I appreciate their efforts and support.

User: Richard***** Passing my hpe6-a44 exam was crucial for keeping my job at my current company, but I knew it would not be easy without some assistance. Fortunately, I was able to learn a lot from Killexams.com training pack, which included hpe6-a44 questions and answers as well as an exam simulator. Now, I am proud to announce that I am hpe6-a44 certified. Thank you, Killexams.com, for helping me achieve my goal.

---