iPass4sure.netCertification Practice Test | PDF Questions | Actual Questions | Test Engine | Pass4Sure
HPE6-A48 : Aruba Certified Mobility Expert (ACMX) Exam
HP HPE6-A48 Questions & Answers
Full Version: 101 Q&A
HPE6-A48 Dumps HPE6-A48 Braindumps
HPE6-A48 Real Questions HPE6-A48 Practice Test HPE6-A48 Actual Questions
killexams.com
HP
HPE6-A48
Aruba Certified Mobility Expert (ACMX)
https://killexams.com/pass4sure/exam-detail/HPE6-A48
Then enable the Skype4Business ALG in the UCC profiles.
D . Use a media firewall policy that match these three flows, and use permit and TOS actions with 56, 40, and 34 values for voice, video, and application sharing, respectively. Then enable the Skype4Business ALG in the UCC profiles.
Question: 87
Refer to the exhibits. Exhibit 1
Exhibit 2
A network administrator adds a new Mobility Controller (MC) to the production Mobility Master (MM) and deploys APs that start broadcasting the employees SSID in the West wing of the building. Suddenly, the employed report client disconnects.
When accessing the MM the network administrator notices that the MC is unreachable, then proceeds to access the MC’s console and obtains the outputs shown in the exhibits.
What should the network administrator do next to solve the current problem? A . Decommission the MC from the MM, and add it again.
B . Open a TAC case, and send the output of tar crash. C . Verify the license pools in the M
E . Kill two zombie processes, then reboot the M
Answer: D Question: 88 Refer to the exhibit.
A user reports show response time to a network administrator and suggests that there might be a problem with the WLAN. The user’s laptop supports 802.11n in the 2.4 GHz band only. The network administrator finds the user on the Mobility Master (MM) and reviews the output shown in the exhibit.
What can the network administrator conclude after analyzing the data?
A . Client health is low, and retried frames are high. It is possible there is high channel utilization.
B . Client health is low, but SNR is high. It is possible data in the dashboard is not accurate and needs to be updated. C . The speed is good. Client health seems to be related to a problem with the client NI
E . The network is low because of low SN
F . TX power must be increased in both the client and the A
Answer: B Question: 89 Refer to the exhibit.
A user reports show response time to a network administrator and suggests that there might be a problem with the WLAN. The user’s laptop supports 802.11n in the 2.4 GHz band only. The network administrator finds the user on the Mobility Master (MM) and reviews the output shown in the exhibit.
What can the network administrator conclude after analyzing the data?
A . Client health is low, and retried frames are high. It is possible there is high channel utilization.
B . Client health is low, but SNR is high. It is possible data in the dashboard is not accurate and needs to be updated. C . The speed is good. Client health seems to be related to a problem with the client NI
E . The network is low because of low SN
F . TX power must be increased in both the client and the A
Answer: B Question: 90 Refer to the exhibit.
A user reports show response time to a network administrator and suggests that there might be a problem with the WLAN. The user’s laptop supports 802.11n in the 2.4 GHz band only. The network administrator finds the user on the Mobility Master (MM) and reviews the output shown in the exhibit.
What can the network administrator conclude after analyzing the data?
A . Client health is low, and retried frames are high. It is possible there is high channel utilization.
B . Client health is low, but SNR is high. It is possible data in the dashboard is not accurate and needs to be updated. C . The speed is good. Client health seems to be related to a problem with the client NI
E . The network is low because of low SN
F . TX power must be increased in both the client and the A
Answer: B Question: 91 Refer to the exhibit.
A network administrator deploys a Mobility Master (MM)-Mobility Controller (MC) network with APs in different locations. Users in one of the locations report that the WiFi network works fine for several hours, ang then they are suddenly disconnected. The symptom may happen at any time, up to three times every day, and lasts no more than two minutes.
After some research, the network administrator logs into the MM and reviews the output shown in the exhibit. Based on this information, the network administrator logs into the MM and reviews the output shown in the exhibit. Based on this information, what is the most likely reason users get disconnected?
A . AirMatch is applying a scheduled optimization solution.
B . Users in the 2.4 GHz band are being affected by high interference. C . Adpative Radio Management is reacting to RF events.
D . AirMatch is reacting to non-scheduled RF events.
Answer: B
Question: 92
A network administrator implements a SIP-based IP telephone solution. The objective is to ensure that APs use 100% of their airtime for network access whenever a voice call is taking place, to minimize communication delays. The network administrator also wants to ensure that a log entry is generated when voice calls occur.
Which setup accomplishes these tasks?
A . ip access-list session voice
user any svc-rtsp permit log queue high user any svc-sip-udp permit log queue high B . ip access-list session voice
user any-svc-rtsp permit disable-scanning log user any svc-sip-udp permit disable-scanning log C . ip access-list session voice
user any svc-rtsp permit log dot1p-priority 7
user any svc-sip-udp permit log dot1p-priority 7 D . ip access-list session voice
user any svc-rtsp permit log tos 56 user any svc-sip-udp permit log tos 56
Answer: C Question: 93 Refer to the exhibit.
A network administrator wants to allow contractors to access the WLAN named EmployeesNet. In order to restrict network access, the network administrator wants to assign this category of users to the contractor firewall role.
To do this, the network administrator configures ClearPass in a way that it returns the Aruba-User-Role VSA with the contractor value. When testing the solution the network administrator receives the wrong role.
What should the network administrator do to assign the contractor role to contractor users without affecting any other role assignment?
A . Set contractor as the default role in the AAA profile. B . Create the contractor firewall role in the M
D . Create server derivation rules in the server group.
E . Check the Download role from the CPPM option in the AAA profile.
Answer: A Question: 94 Refer to the exhibit.
A network administrator deploys a multizone AP in the campus network in order to provide service for 11 SSIDs. After a few hours, the network administrator realizes that the AP is only broadcasting 5 out of the 11 SSIDs. The missing SSIDs belong to MC1 at IP address 10.254.10.114, and MC4 with IP address 10.2.100.25.
Based on the exhibit, what should the network administrator do next to fix this problem?
A . Confirm that AP12 is certified by the whitelist on MC1 and MC4, and confirm MC1 and MC4 are reachable by AP12.
B . Increase the number of nodes in zones 1 and 4, and confirm MC1 and MC4 are reachable by AP12.
C . Confirm that AP12 is certified by the whitelist on MC1 and MC4, and increase the number of nodes in zones 1 and 4.
D . Reduce the number of nodes in zones 0 and 4, and disband the cluster in zone 0.
Answer: D Question: 95 Refer to the exhibit.
A user reports show response time to a network administrator and suggests that there might be a problem with the WLAN. The user’s laptop supports 802.11n in the 2.4 GHz band only. The network administrator finds the user on the Mobility Master (MM) and reviews the output shown in the exhibit.
What can the network administrator conclude after analyzing the data?
A . Client health is low, and retried frames are high. It is possible there is high channel utilization.
B . Client health is low, but SNR is high. It is possible data in the dashboard is not accurate and needs to be updated. C . The speed is good. Client health seems to be related to a problem with the client NI
E . The network is low because of low SN
F . TX power must be increased in both the client and the A
Answer: B Question: 96 Refer to the exhibit.
A network administrator adds a Mobility Controller (MC) in the /mm level and notices that the device does not show up in the managed networks hierarchy. The network administrator accesses the CLI, executes the show switches command, and obtains the output shown in the exhibit.
What is the reason that the MC does not appear as a managed device in the hierarchy?
A . The network administrator added the device using the wrong Pre=shared Key (PSK). B . The digital certificate of the MC is not trusted by the M
D . The IP address of the MC does not match the one that was defined in the M F . The network administrator has not moved the device into a group yet.
Answer: B
Question: 97
Refer to the exhibits. Exhibit 1
Exhibit 2
Exhibit 3
A network administrator deploys a Mobility Master (MM) pair with the VRRP VIP equal to 10.254.10.214, and attempts to associate MC1 to it. At first, the integration appears to be successful.
However after a few minutes the network administrator issues the show switches command and sees that the MC1 is down, even though the device is up and running.
Every time the network administrator reboots the Mobility Controller (MC), the MC shows as being up and then it shows as being down. The network administrator gathers the information shown in the exhibits.
What should the network administrator do to resolve this problem?
A . Change the localip ipsec key to Aruba123 in the mynode device level from the MM, save, and reboot.
B . Enable disaster recovery mode in MC1 and change the masterip ipsec key to Aruba 123, save, and reboot. C . Change the masterip ipsec key to Aruba123 in the device level from the MM, save, then reboot MC1.
D . Wipe out the configuration in MC1 and reboot, then run the full-setup configuration dialog all over again.
Answer: B Question: 98 Refer to the exhibit.
A user reports show response time to a network administrator and suggests that there might be a problem with the WLAN. The user’s laptop supports 802.11n in the 2.4 GHz band only. The network administrator finds the user on the Mobility Master (MM) and reviews the output shown in the exhibit.
What can the network administrator conclude after analyzing the data?
A . Client health is low, and retried frames are high. It is possible there is high channel utilization.
B . Client health is low, but SNR is high. It is possible data in the dashboard is not accurate and needs to be updated. C . The speed is good. Client health seems to be related to a problem with the client NI
E . The network is low because of low SN
F . TX power must be increased in both the client and the A
Answer: B
Question: 99
Refer to the exhibits. Exhibit1
Exhibit2
A network administrator integrates a current Mobility Master (MM)-Mobility Controller (MC) deployment with a RADIUS infrastructure. After using the RADIUS server to authenticate a wireless user, the network administrator realizes that the client machine is not falling into the it_department role, as shown in the exhibits.
Which configuration is required to map the users into the proper role, based on standard attributes returned by the RADIUS server in the Access Accept message?
A . aaa server-group Corp-Network
set role condition Filter-Id equals it-role set-value it_department B . aaa server-group GROUP-RADIUS
set role condition Filter-Id equals it-role set-value it_department C . aaa server-group Corp-employee
set role condition Filter-Id equals it-role set-value it_department D . aaa server-group Corp-employee
set role condition Filter-Id value-of
Answer: B
Question: 100
A software development company has 700 employees who work from home. The company also has small offices located in different cities throughout the world. During working hours, they use RAPs to connect to a datacenter to upload software code as well as interact with databases.
In the past two months, brief failures have occurred in the 7240XM Mobility Controller (MC) that runs ArubaOS 8.3 and terminates the RAPs. These RAPs disconnect, affecting the users connected to the RAPs. This also causes problems with code uploads and database synchronizations. Therefore, the company decides to add a second 7240XM controller for redundancy.
How should the network administrator deploy both controllers in order to provide redundancy while preventing failover events from disconnecting users?
A . Connect both controllers with common VLANs, and create an L2-connected cluster using public addresses in the internet VLA
C . Connect both controllers with common VLANs, and create an HA fast failover group with public addresses in the internet VLA
E . Connect both controllers with different VLANs, and create an L2-connected cluster using private addresses in the internet VLA
G . Connect both controllers with common VLANs, and configure LMS/BLMS values equal to public addresses in the internet VLA
Answer: A
User: Antonella*****
I wholeheartedly recommend killexams.com to anyone who wants to excel in the hpe6-a48 exam. Their study guide helped me score an 89%, and I was extremely pleased with the results. I realized that extensive memorization was not the only solution to success in exams after using the killexams.com practice tests to prepare for my hpe6-a48 exam. I am incredibly satisfied with my performance. |
|
User: Luda*****
Every topic and scenario for the hpe6-a48 exam was thoroughly covered in Killexams.com’s materials, giving me the confidence to face the test. Despite initial nerves, their practice tests and clear explanations made the exam manageable, and I passed with a strong score. I am now aiming for further HP certifications. |
User: Savina*****
Preparing for the HPE6-A48 exam was a daunting goal this year, as I was concerned about its complexity. After reading glowing reviews about Killexams.com, I decided to invest in their study materials. Their testprep resources were thorough, covering every topic I encountered on the exam. The clear explanations and well-structured practice questions made my preparation seamless, allowing me to pass with ease. I am delighted with my experience and highly recommend Killexams to anyone pursuing certification. |
|
User: Tawnya*****
The HPE6-A48 exam materials from Killexams.com were outstanding, with valid questions and precise answers. The professional exam simulator provided all the necessary information, eliminating unnecessary clutter. I passed with a near-perfect score, and Killexams.com has earned my trust for future certifications. |
|
User: Laika*****
I found the precise answers to be easy to remember. I was able to make all the right responses during the hpe6-a48 exam because of my familiarity with the Killexams.com Questions and Answers. I preferred using Killexams.com for my exam preparation, which I completed within just 12 days. The presentation of the study material was simple and without any unnecessarily lengthy answers or confusing explanations. Even topics that are generally difficult were taught superbly. |
Features of iPass4sure HPE6-A48 Exam
- Files: PDF / Test Engine
- Premium Access
- Online Test Engine
- Instant download Access
- Comprehensive Q&A
- Success Rate
- Real Questions
- Updated Regularly
- Portable Files
- Unlimited Download
- 100% Secured
- Confidentiality: 100%
- Success Guarantee: 100%
- Any Hidden Cost: $0.00
- Auto Recharge: No
- Updates Intimation: by Email
- Technical Support: Free
- PDF Compatibility: Windows, Android, iOS, Linux
- Test Engine Compatibility: Mac / Windows / Android / iOS / Linux
Premium PDF with 101 Q&A
Get Full VersionAll HP Exams
HP ExamsCertification and Entry Test Exams
Complete exam list