Juniper JN0-363 Questions & Answers

Full Version: 420 Q&A

Latest JN0-363 Exam Questions and Practice Tests 2025 - Killexams.com

JN0-363 Braindumps JN0-363 Real Questions JN0-363 Practice Test

JN0-363 Actual Questions

Juniper

JN0-363

Service Provider Routing and Switching, Specialist (JNCIS-SP)

https://killexams.com/pass4sure/exam-detail/JN0-363

Question: 17

You want to see a detailed list of all established BGP sessions.

In this scenario, what would be a valid command to accomplish this task?

show bgp neighbor
show bgp summary
show rouse receive-protocol bgp <neighbor IP address>
show rouse protocol bgp

Answer: A Question: 18 Exhibit

Referring to the exhibit, internal BGP between R1 and R2 is not establishing. What is the problem In this scenario?

R1 does not have a route to 192.168.200.2.
R1 and R2 must each have unique AS numbers.
R1 needs to be configured with an explicit router I
R1 needs to be configured with a next-hop self policy.

Answer: B

Question: 19

Which two statements are correct about the service provider MPLS network shown in the exhibit? (Choose two.)

R3 is considered a P router.
R3 is considered a PE router.
R3 is considered a transit router.
R3 is considered an ingress router.

Answer: A,B Question: 20 Exhibit

Referring to the exhibit, where should next-hop-self-policy be applied to alter the next-hop value?

The policy is applied as an export policy for the group int-64503.
The policy is applied as an export policy for the group ext-64501.
The policy is applied as an import policy for the group int- 64 503.
The policy is applied as an Import policy for the group ext-64501.

Answer: A Question: 21

Which statement describes integrated routing and bridging (IRB) interfaces?

An IRB interface Is an IP gateway For hosts of a bridge domain.
An IRB interface assigns interfaces to VLANs.
An IRB interface enables Layer 2 switching on the router.
An IRB interface defines a bridge domain.

Answer: A Question: 22 Exhibit

The routers shown in the exhibit ate configured for segment routing.

In this scenario, what is the adjacency SIO that Router B advertises to Router A?

Answer: B Question: 23

You have created a routing instance named vr3 that will provide access to Server 2 (10.0.0.2) (or the hosts on the 10.10.10.0/24 network.

Which command would you use to test connectivity between vr3 and Server 2?

user@vr3> ping 10.0.0.2 count 5
user@vr3> ping 10.0.0.2 count 5 source 10.10.10.1
user9router1> ping 10.0.0.2 count 5
user@router1> ping 10.0.0.2 routing-instance vr3 count 5

Answer: D Question: 24

Which configuration selling prohibits a static route from being redistributed by a dynamic routing protocol?

route-filter
no-readvertise
qualified-next-hop
passive

Answer: B Question: 25

Referring to the exhibit, which two statements are correct? (Choose two.)

The OSPF Interfaces are configured as point-to-point.
The ge-0/0'1.0 Interface is configured as passive.
The R2 device is an AB
Junos OS default OSPF hello timers and dead intervals are used on all interfaces.

Answer: A,C Question: 26

You are asked to create connections between routing instances on the same Junos device and route between the connected Instances.

What are two ways to accomplish this task? (Choose two.)

Use physical interfaces.
Use an IRB interface.
Use logical tunnel interfaces.
Use loopback interfaces.

Answer: A,B,C Question: 27 Exhibit.

Referring to the exhibit, you have configured an aggregate route that represents the 172.21.0.0/24, 172.21.1.0/24, and 172.21.2.0/24 networks. However, when you view the routing table, your new route hidden.

Which action would you perform to determine the problem?

Verify that you have active contributing routes on the device.
Verify that you have configured a policy on the device to accept aggregate routes.
Verify that you have defined a metric value for the aggregate route.
Verify that you have set the preference to a lower default value.

Answer: A Question: 28

You are adding an IPv6 configuration to an Interface on a Junos device. In this scenario, which statement is correct?

The link local address must be manually configured within the fdO0::/8 prefix range.
The link local address must be manually configured within the fe80::/10 prefix range.
The link local address is automatically created using the MAC address within the fe80::'l0 prefix range.
The link local address is automatically created using the MAC address within the fd00::/8 prefix range.

Answer: C Question: 29

Referring to the exhibit, which statement is true about VRRP?

VRRP communication between the two devices is not functioning correctly.
Both routers are in the same state because they have the same VRRP priority.
RRP Is functioning normally in active/active mode.
The routers should use different virtual IP addresses for VRRP to function correctly.

Answer: A Question: 30 Exhibit

Referring to the exhibit, how do you verify the status of the tunnel from R1?

Issue the ping 172.20.111.10 source 172.20.110.1 command.
Issue the ping 172.20.111.10 source 198.51.100.1 command.
Issue the ping 172.20.iii.io source 203.0.113.2 command.
Issue the ping 172.20. Ill. 10 command.

Answer: C

User: Leni*****

Initially, I had failed the jn0-363 exam after a year of preparation. I found the topics unmanageable until I discovered the questions and answers guide by Killexams.com. It was the best guide I ever purchased for my exam preparation. Even as a slow learner, I found the material to be manageable and passed the exam with 89%. Thank you, Killexams.com.

User: Elijah*****

I owe my achievement in passing the JN0-363 exam to Killexams.com. All the questions on the exam were from their guide, making it the true helper for me on the exam. This observation guide perfectly guided me for trying JN0-363 exam questions and ensured my 100% success in the exam.

User: Tanja*****

The exam coaching package from killexams.com is truly worth the money because it helped me pass the jn0-363 exam with a score of 94%. All of the questions were valid and appeared on the exam, which shows that killexams.com has been keeping up with the exam updates. I have known people who used killexams.com for other IT exams in the past, and they said that killexams.com was just as precise back then. It is a very dependable and truthful resource.

User: Emiliano*****

I am impressed to see that the JN0-363 brain practice test is up to date with new modifications. These updates were unexpected, and I am excited to take the exam soon. I plan to order the new exam preparation materials from Killexams.com.

User: Thomas*****

I am very satisfied with the killexams.com bundle deal because I scored over 96% in the JN0-363 exam. I did review the reliable JN0-363 guide a bit, but I believe killexams.com was my primary study resource. I memorized most of the questions and answers and invested my time to understand the concepts and technical/practical elements of the exam. Simply buying the killexams.com bundle does not guarantee that you will pass your exam - some tests are challenging. However, if you study their material diligently and put your heart and mind into your exam preparation, then killexams.com truly outperforms any other exam prep alternatives available.

Features of iPass4sure JN0-363 Exam

Files: PDF / Test Engine
Premium Access
Online Test Engine
Instant download Access
Comprehensive Q&A
Success Rate
Real Questions
Updated Regularly
Portable Files
Unlimited Download
100% Secured
Confidentiality: 100%
Success Guarantee: 100%
Any Hidden Cost: $0.00
Auto Recharge: No
Updates Intimation: by Email
Technical Support: Free
PDF Compatibility: Windows, Android, iOS, Linux
Test Engine Compatibility: Mac / Windows / Android / iOS / Linux

Premium PDF with 420 Q&A

Get Full Version

All Juniper Exams

Juniper Exams

Certification and Entry Test Exams

Complete exam list