iPass4sure.net

Certification Practice Test | PDF Questions | Actual Questions | Test Engine | Pass4Sure

JN0-682 : Data Center, Professional (JNCIP-DC) Exam

Juniper JN0-682 Questions & Answers

Full Version: 65 Q&A


Latest JN0-682 Exam Questions and Practice Tests 2025 - Killexams.com


JN0-682 Dumps

JN0-682 Braindumps JN0-682 Real Questions JN0-682 Practice Test

JN0-682 Actual Questions


Juniper


JN0-682


Data Center, Professional (JNCIP-DC)


https://killexams.com/pass4sure/exam-detail/JN0-682

Question: 53


Which statement is true about a Data Center Interconnect over an IP network?

  1. Layer 2 data must traverse a point-to-point link.

  2. Layer 2 data must traverse an MPLS LS

  1. Layer 2 data must be encapsulated.

  2. Layer 3 data must be encapsulated.


Answer: C


Question: 54


You work in a data center where VMs and hosts are frequently moved. Your design needs to eliminate inefficient traffic flows.


In this scenario, which two solutions will satisfy this requirement? (Choose two.)

  1. VXLAN

  2. EVPN

  3. VMTO

  4. VPLS


Answer: B, C


Question: 55

A VXLAN adds 50 to 54 bytes of extra header information to an Ethernet frame. In this scenario, how would you accommodate this increase?

  1. Decrease the number VXLANs used.

  2. Increase the MTU on the physical interface connected to the VXLAN network.

  3. Only use switches as VTEPs.

  4. Increase the MTU on the VTEP interface connected to the VXLAN network.


Answer: B


Question: 56


You host a multitenant data center that runs VMware. You must perform deep packet inspection on all inter-tenant traffic that is flowing between the VMs within the same hypervisor. Your solution must provide the security services without needing to leave the physical device.


In this scenario, what should you do to solve this problem?

  1. Use separate vSwitches to isolate each tenant’s networks and use IP tables to evaluate inter-tenant traffic.

  2. Use VLANs to isolate each tenant’s networks and use an SRX Series device to evaluate inter-tenant traffic.

  3. Use a vMX device to isolate each tenant’s networks and use with firewall filters to evaluate inter-tenant traffic.

  4. Use separate vSwitches to isolate each tenant’s networks and use a vSRX Series device to evaluate inter-tenant traffic.


Answer: D


Question: 57


Which two statements describe MAC address learning for VPLS and EVPN? (Choose two.)

  1. EVPN learns MAC addresses in the data plane.

  2. VPLS learns MAC addresses in the control plane.

  3. VPLS learns MAC addresses in the data plane.

  4. EVPN learns MAC addresses in the control plane.


Answer: C, D


Question: 58


You are asked to manage the oversubscription ratio of your spine and leaf IP fabric. You determine that you are at a 3:1 ratio of downstream to upstream traffic and must achieve a 1:1 ratio.


In this scenario, which two actions would you take to achieve this goal? (Choose two.)

  1. Increase the number of server-facing ports that each leaf node uses to carry traffic.

  2. Reduce the number of server-facing ports that each leaf node uses to carry traffic.

  3. Increase the number of spine nodes in your design.

  4. Reduce the number of leaf nodes in your design.


Answer: B, C


Question: 59


You are logged in to Leaf 1.


When examining the routing table, you notice that you have no routes from Leaf 2.


Referring to the exhibit, which two commands would you use to troubleshoot the problem? (Choose two.)

  1. From Leaf 2, issue the show route advertising-protocol bgp 172.16.1.2command.

  2. From Spine 1, issue the show route advertising-protocol bgp 172.16.1.1command.

  3. From Spine 1, issue the show route advertising-protocol bgp 172.16.1.2command.

  4. From Leaf 1, issue the show route receive-protocol bgp 172.16.1.1command.


Answer: C, D


Question: 60


A company wants to expand their hosting business and is seeking solutions to support multiple tenants. Each tenant should be able to configure their own logical interfaces. Also, based on customer needs, all routing features must be supported.


What will satisfy the customer’s requirements?

  1. routing instances

  2. tenant systems

  3. logical systems

  4. bridge domains


Answer: A


Question: 61


An EVPN-signaled VXLAN overlay has been deployed in the network shown in the exhibit. Host1 is a bare metal server, and is dual-homed to the network. The IP addresses 10.1.1.1/24 and 10.1.1.2/24 are assigned to the same physical NIC, and no virtualization is configured on the server.



In this scenario, which two statements are true? (Choose two.)

  1. The MAC address associated with 10.1.1.1/24 and 10.1.1.2/24 will be the same when advertised to leaf3.

  2. The connection from host1 to devices leaf1 and leaf2 must be configured as a LA

  1. Traffic from IP address 10.1.1.1/24 must traverse the VXLAN network to reach IP address 10.1.1.2/24.

  2. The ESI assigned to the leaf1-host1 link must be the same as the ESI assigned to the leaf2-hostl link.


Answer: C, D


Question: 62


You are designing a Layer 3 fabric underlay using EBGP. You will implement an EVPN-signaled VXLAN overlay on the Layer 3 fabric.


In this scenario, what must you do in the underlay to ensure that the VXLAN overlay will be able to function properly?

  1. The underlay should advertise the host-connected interfaces on all leaf devices.

  2. Each device in the underlay should advertise its loopback address.

  3. The underlay should be configured with a separate VRF for each potential tenant.

  4. The underlay should support the PIM protocol.

Answer: B


Question: 63


After configuring an IP fabric using EBGP as your routing protocol, you notice that not all of the routes are showing up in the routing tables. You have verified that all adjacencies have formed, and that all policies are in place and configured properly.


In this scenario, which statement is true?

  1. The routers have not been configured with the multipath multiple-asparameter.

  2. The routers have not been configured using the add-pathparameter.

  3. The routers have not been configured using the bfd-liveness-detectionparameter.

  4. The routers have not been configured using the multihopparameter.


Answer: D


Question: 64


You are designing an EBGP IP fabric for a multi-site data center. In this scenario, which two statements are true? (Choose two.)

  1. Public AS numbers must be used.

  2. Different AS numbers should be used on all devices.

  3. The same AS number should be used on all devices across all data centers.

  4. Private AS numbers can be used.


Answer: B, D


Question: 65


You are configuring VXLAN, and you must ensure that all switches for the multicast groups advertise their existence and learn about other VTEPs.


In this scenario, which protocol will accomplish this task?

  1. OSPF

  2. BGP

  3. EVPN

  4. PIM


Answer: D


User: Wesley*****

I chose to use the JN0-682 preparation materials from Killexams.com as they provided an excellent platform for preparation and helped me score 92% on the JN0-682 exam tests. The method of problem-solving was unique, and with the support of the materials, I could solve even the most complicated questions. My preparation became less complicated with the guidance of Killexams.com, and I was able to expand my knowledge nicely.
User: Maxine*****

I would like to thank killexams.com for being an excellent study partner for the JN0-682 exam. The resource material available on their website was like a true friend, providing me with the support and guidance I needed to succeed. I highly recommend killexams.com to anyone looking for a reliable and effective study partner.
User: Winnie*****

The comprehensive test prep materials from Killexams.com played a pivotal role in my achieving a 92% score on the JN0-682 exam. Their unique approach and detailed content simplified even the most challenging topics, making my preparation both effective and enjoyable. I am delighted with how their resources helped me excel and highly recommend them to others.
User: Sueta*****

Testprep mock tests, with detailed explanations, led to a 90% score on the JN0-682 exam. Their practice-based approach ensured a confident pass, and I am grateful for their well-organized resources.
User: Natalie*****

I was impressed to see that the jn0-682 practice test was updated with new scenarios that I did not expect to find anywhere else. I recently took my first jn0-682 exam, and now I plan to order the updated version.

Features of iPass4sure JN0-682 Exam

  • Files: PDF / Test Engine
  • Premium Access
  • Online Test Engine
  • Instant download Access
  • Comprehensive Q&A
  • Success Rate
  • Real Questions
  • Updated Regularly
  • Portable Files
  • Unlimited Download
  • 100% Secured
  • Confidentiality: 100%
  • Success Guarantee: 100%
  • Any Hidden Cost: $0.00
  • Auto Recharge: No
  • Updates Intimation: by Email
  • Technical Support: Free
  • PDF Compatibility: Windows, Android, iOS, Linux
  • Test Engine Compatibility: Mac / Windows / Android / iOS / Linux

Premium PDF with 65 Q&A

Get Full Version

All Juniper Exams

Juniper Exams

Certification and Entry Test Exams

Complete exam list