3V0-42.20 : Advanced Design VMware NSX-T Data Center Exam

3V0-42.20 Dumps
3V0-42.20 Braindumps
3V0-42.20 Real Questions
3V0-42.20 Practice Test
3V0-42.20 Actual Questions


Vmware
3V0-42.20
Advanced Design VMware NSX-T Data Center
https://killexams.com/pass4sure/exam-detail/3V0-42.20
Question: 50
Refer to the exhibits.
Design Option1:

Design Option 2:

Design Option 3:

Design Option 4:

An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
The conceptual design includes these requirements, assumptions, constraints, and risks:
Critical applications must run across sites without changing IP address.
Business continuity and disaster recovery (BCDR) plans will leverage a second site running vSphere.
RTO/RPO must be reduced for recovery of applications on secondary site.
IT Teams require automation tools for configuration.
Which Conceptual Design would the architect recommend to the customer? (Choose the best answer.)
A. Design Option 4
B. Design Option 2
C. Design Option 1
D. Design Option 3
Answer: C
Question: 51
A customer deploying NSX-T Data Center requires role based access controls be enforced in NSX Manager with
these requirements:
identity platform must be highly available
authentication must be performed by customer's existing SAML identity provider
MFA must be performed by administrator to gain access to NSX Manager
Which identity deployments would meet the customer's requirements? (Choose the best answer.)
A. NSX Manager OAuth 2.0 registered to a 3-node Active Directory Federation Services cluster.
B. NSX Manager OAuth 2.0 registered to a 2-node VMware Identity Manager cluster.
C. NSX Manager OAuth 2.0 registered to a 2-node Active Directory Federation Services cluster
D. NSX Manager OAuth 2.0 registered to a 3-node VMware Identity Manager cluster.
Answer: D
Question: 52
Refer to the exhibit.



A financial company is adopting micro-services with the intent of simplifying network security. An NSX-T
architect is proposing a NSX-T Data Center micro- segmentation logical design. The architect has created a
diagram to share with the customer.
How many security levels will be implemented according to this Logical Design? (Choose the best answer.)
A. 5 levels
B. 3 levels
C. 9 levels
D. 4 levels
Answer: A
Question: 53
Which selection must be taken into consideration when creating a Logical Design for a planned migration? (Choose
the best answer.)
A. An N-VDS can only attach to a single Overlay transport zone.
B. An N-VDS can only attach to a single VLAN transport zone.
C. An N-VDS can attach to both an Overlay and a VLAN transport zone to a N-VDS having different
name/s.
D. An N-VDS must be disabled before attaching both Overlay and VLAN transport zones.
Answer: B
Question: 54
Which three assessment findings are part of a Conceptual Design? (Choose three.)
A. risks
B. host names
C. justifications
D. constraints
E. assumptions
F. vendor model
Answer: ACD
Question: 55
An administrator is asked to improve Recovery Point Objective (RPO) and Recovery Time Objective (RTO) for
Disaster Recovery (DR) in their company network.
The network has a primary site and a secondary site. The ability to support outages with minimum loss of
connectivity to the company's core application is a priority.
Which design should the administrator recommend? (Choose the best answer.)
A. NSX-T Data Center using an Orchestrator to recover VMs across sites.
B. NSX-T Data Center using Federation and dependencies set between primary and secondary sites.
C. NSX-T Data Center using a registered third-party DR solution.
D. NSX-T Data Center using built-in standard automation DR and secondary site recovery setup.
Answer: rdB
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
Question: 56
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
Customer is concerned with NSX Manager availability.
3 cabinets/racks are available in the data center.
No integration with 3 -
party solution is required.
There is no budget for physical equipment acquisition.
The 3 cabinets/racks do not share the same L2 domain.
Which three selections should the architect include in their design to address the customer's concern with NSX
Manager availability? (Choose three.)
A. Deploy 2 cold standby NSX Manager appliances in rack 2/3.
B. Use separate IP per NSX Manager appliance per rack.
C. Use another NSX Manager IP in case an appliance fails.
D. Deploy a single active NSX Manager appliance in rack 1.
E. Deploy an NSX Manager Appliance per rack and cluster them.
F. Use a physical/internal load-balancer with the cluster.
Answer: ADE
Question: 57
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
Maximum performance and availability is required between the physical and virtual network.
Load Balancing service is required for back-end web servers.
NAT is required.
Which selection should the architect include in their design? (Choose the best answer.)
A. Deploy a Tier-1 gateway and connect it to an Active/Active Tier-0 gateway with ECMP configured.
B. Deploy an Active/Active Tier-0 gateway and configure ECMP.
C. Deploy an Active/Standby Tier-0 gateway and configure ECMP.
D. Create two separate VLANs to connect the Tier-0 gateway upstream traffic and configure ECMP.
Answer: C

User: Sascha***** Thanks to killexams.com, I was able to achieve a score of 96% on the 3V0-42.20 certification exam. I first heard about the website through a friend who had also scored high on the exam. Despite initially making fun of him for using an exam preparation platform, I decided to try it out for myself. The results were astounding, and I now have complete faith in the website.

User: Lieve***** Although I missed a couple of questions, I was still able to pass the 3V0-42.20 exam and answer 43 out of 50 questions. I found that learning from killexams.com Questions and Answers was enough to help me pass the exam. The pack was 100% faithful, and many of the questions were identical to those on the actual exam.

User: Tetyana***** I am delighted to share my experience with killexams.com, as it has helped me achieve my dream of passing the 3v0-42.20 exam. With this certification, I am now qualified for higher job positions and can choose a better career path. This opportunity was something I could not even imagine a few years ago. Although the 3v0-42.20 exam and certification are specific to 3v0-42.20, I discovered that other employers are also interested in candidates who have passed this exam, as it proves their excellent skills. The killexams.com 3v0-42.20 guidance package helped me answer most questions correctly, covering all topics and regions. Some 3v0-42.20 product questions are tricky, but with killexams.com, I was able to get the maximum number of questions right.

User: Youssef***** I have renewed my session with Killexams.com for the 3v0-42.20 exam. I believe that it is crucial to have access to the site valuable resources and tests, which will help me to achieve my 3v0-42.20 accreditation with above 95% marks. The team at Killexams.com is doing an excellent job, and I am grateful for their support.

User: Ayden***** I got forty-four correct answers out of the set of 50 within the allotted 75 minutes, thanks to Killexams.com practice tests for the 3v0-42.20 exam. The assistance was helpful, with concise answers and relevant examples. It was a pleasant experience, and I am grateful to Killexams.com for their support.

---