5V0-21.21 : VMware HCI Master Specialist Exam

5V0-21.21 Dumps
5V0-21.21 Braindumps
5V0-21.21 Real Questions
5V0-21.21 Practice Test
5V0-21.21 Actual Questions


Vmware
5V0-21.21
VMware HCI Master Specialist
https://killexams.com/pass4sure/exam-detail/5V0-21.21
Question: 126
An administrator is tasked with preparing for a Cross vCenter migration in a stretched vSAN cluster where the virtual
machines migration will be orchestrated via VMware Site Recovery Manager.
Which action should the administrator take so the migration is successful?
A. Disable vSAN Deduplication and Compression
B. Reconfigure vCenter HA Admission control
C. Enable vCenter Single Sign-On Enhanced Linked Mode
D. Make sure that Witness traffic is on the management NI
Answer: C
Explanation:
Reference: https://docs.vmware.com/en/Site-Recovery-Manager/8.4/com.vmware.srm.admin.doc/GUID-B64096E8-
F49A-4BF6-92CE-05FBA972F3C0.html
Question: 127
Due to the success of the recently deployed developer-only private cloud solution, a company has a new requirement
to at least double the usable capacity in their all-flash vSAN cluster.
The vSAN cluster is deployed into a co-located datacenter that is owned by a third-party hosting company. The
hosting company charges a fixed monthly cost for rack space and power consumption. The service owner has been
given a limited budget for additional hardware purchases, but not for on-going co-location costs.
The current vSAN cluster has the following configuration:
* 10 vSAN Nodes with 2 CPUs (20 cores), 512 GB RAM
* 1 Disk Group per vSAN node
- 1 x 400 GB
- 4 x 1.8 TB
* De-duplication and Compression is enabled.
* vSAN Capacity is currently:
- Total: 72 TB
- Usable: ~40 TB (FTT1/RAID1) and ~60 TB (FTT1/RAID5).
As a result of any action taken, the service owner would like to ensure that overall availability of the vSAN cluster is
increased.
Which two recommendations meet the requirement to increase capacity while maintaining service availability?
(Choose two.)
A. Install an additional 400 GB SSD and 4 x 1.8 TB SSDs per vSAN node.
B. Update the existing Disk Group, and claim the newly installed drives for each node.
C. Create a new Disk Group, and claim the newly installed cache and capacity SSD drives for each node.
D. Install an additional 3 x 1.8 TB SSDs per vSAN node.
E. Replace existing SSDs with an 800 GB SSD and 4 x 3.8 TB SSDs per vSAN node.
Answer: A,C
Question: 128
An administrator is setting up vSAN file services on a vSAN cluster.
Which two security policies on the distributed port groups are automatically enabled in the process? (Choose two.)
A. Forged Transmits
B. Promiscuous Mode
C. DVFiltering
D. Jumbo Frames
E. MacLearning
Answer: A,B
Explanation:
Reference: https://www.yellow-bricks.com/2020/04/15/vsan-file-services-considerations/
Question: 129
An architect is working with an All-Flash vSAN configuration and will be using the Flash Caching Devices in vSAN.
Which requirement is specifically needed for these devices?
A. Write endurance
B. IOPS
C. Read endurance
D. Capacity
Answer: A
Explanation:
Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vsan-planning.doc/GUID-
1D6AD25A-459A-43D6-8FF5-52475499D6A2.html
Question: 130
Which statement accurately describes the result when proper VM Storage Policy Affinity Rules on a stretched vSAN
cluster are set?
A. When a site is disconnected, the VM will lose access to its VMD
B. When a site is disconnected, the VM will continue to have access to its VMD
C. Bandwidth is unnecessarily sent across the inter-site link.
D. Proper policies result in higher inter-site bandwidth utilization.
Answer: A
Question: 131
During a maintenance action on a vSAN node, a vSAN administrator noticed that the default repair delay time is about
to be reached.
Which two commands must be run to extend the time? (Choose two.)
A. /etc/init.d/vsanmgmtd restart
B. esxcli system settings advanced set -o /VSAN/ClomRepairDelay -i 50
C. esxcli system settings advanced set -o /VSAN/ClomRepairDelay -i 80
D. /etc/init.d/clomd restart
E. /etc/init.d/vsanobserver restart
Answer: A,C,D
Question: 132
An administrator wants to enable encryption on an existing vSAN cluster that already contains virtual machines.
Which additional step should the administrator take to ensure no data is lost during the encryption process?
A. Select âErase disks before useâ check box when enabling encryption on a vSAN cluster.
B. Make vCenter Server trust the KMS, either by trusting the KMS or by uploading a KMS certificate.
C. Ensure that the vSAN Encryption is enabled by default on the existing cluster to encrypt old and new data.
D. Disable vSphere Distributed Resources Schedule (DRS) on the vSAN cluster.
Answer: B
Explanation:
Reference: https://core.vmware.com/resource/vsan-data-rest-encryption#sec7014-sub2
Question: 133
Upon investigating a workload performance issue, a vSAN administrator observed a high backend IOPs on a vSAN
cluster.
Which two causes explain this behavior? (Choose two.)
A. The cluster DRS threshold has been set to Aggressive.
B. There is a vSAN node failure.
C. The vSAN Resync throttling is enabled.
D. The object repair timer value has been increased.
E. The vSAN policy protection level has changed from FTT=0 to FTT=1.
Answer: A,B
Explanation:
Reference: https://core.vmware.com/resource/troubleshooting-vsan-performance#_Toc536646878
Question: 134
A customer has upgraded to vSAN 7, but there is still an existing legacy host which must be removed from the vSAN
cluster.
Which three steps must an administrator take to successfully remove this host from the vSAN cluster? (Choose three.)
A. Place the host in maintenance mode with Ensure Accessibility
B. Disconnect from vCenter Server
C. Place the host in maintenance mode with Full Data migration
D. Place the host in maintenance mode with no data migration
E. Remove from vSAN cluster
F. Delete the disk group(s) on the legacy host
Answer: A,C,E,F
Explanation:
Reference: http://www.vexpertconsultancy.com/2019/06/step-by-step-remove-a-node-permanently-from-a-vsan-
cluster/
Question: 135
An architect is working with vSAN and setting the fault domains to support FTT=1.
How many fault domains will be needed?
A. 2
B. 3
C. 4
D. 1
Answer: B
Explanation:
Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vsan-planning.doc/GUID-
FE7DBC6F-C204-4137-827F-7E04FE88D968.html
Question: 136
A company hosts a vSAN 7 stretched cluster for all development workloads. The original sizing of a maximum of 250
concurrent workloads in the vSAN cluster is no longer sufficient and needs to increase to at least 500 concurrent
workloads within the next six months.
To meet this demand, the original 8-node (4-4-1) cluster has recently been expanded to 16 nodes (8-8-1).
Which three additional steps should the administrator take to support the current growth plans while minimizing the
amount of resources required at the witness site? (Choose three.)
A. Add the new vSAN witness appliance to vCenter Server.
B. Deploy a new large vSAN witness appliance at the witness site.
C. Configure the vSAN stretched cluster to use the new vSAN witness.
D. Deploy a new extra large vSAN witness appliance at the witness site.
E. Upgrade the vSAN stretched cluster to vSAN 7.0 U1.
F. Configure the new vSAN witness as a shared witness appliance.
Answer: A,B,C
Question: 137
An administrator is planning to deploy workloads on a six node vSAN cluster, and all nodes are distributed equally
across three racks.
Which action is required to ensure that the workload VMs remain compliant with the default vSAN policy after a
complete rack failure?
A. Add an additional rack with two hosts, and configure vSAN with four fault domains and FTT=1 (erasure coding).
B. Add two additional hosts per rack, and configure vSAN with three fault domains and FTT=1.
C. Add an additional host per rack, and configure vSAN with three fault domains and FTT=2.
D. Add an additional rack with two hosts, and configure vSAN with four fault domains and FTT=1 (mirroring).
Answer: D

User: Susie***** I never thought that the topics I had always avoided would be so much fun to study for the 5v0-21.21 exam. Thanks to Killexams.com practice tests, I was able to prepare for the exam without any stress and got an impressive score of 89%. Initially, I was hesitant to take the exam, but with just a week left, I switched to their exam materials, and it turned out to be a wise decision.

User: Bernardo***** When I discovered Killexams.com, I was doubtful of my success in the 5v0-21.21 exam, but as soon as I made an account here, I realized there was a whole new set of material available, which became the beginning of my successful streak. The 5v0-21.21 practice tests with real exam questions and answers were organized, and the sample set was precise and comprehensive, which assisted me in achieving my goal. I am very thankful for this.

User: Ramil***** I am thrilled to share that I passed the 5V0-21.21 exam thanks to killexams.com. Their question bank was extremely helpful and saved me both time and money. Without their resources, I would have failed the exam. I acknowledge that I struggled with a few questions due to my own lack of preparation, but I am overjoyed to have passed.

User: Nadejda***** As an IT professional, passing the 5V0-21.21 exam was important to me, but time restraints made it difficult to prepare. The easy-to-memorize answers in the Killexams.com test guide made it easy to put together. It worked as a whole reference guide, and I was surprised by the result. I read the Killexams.com test guide two weeks before the exam, finished all of the questions well beneath the stipulated time, and passed.

User: Kiril***** I recently scored a top score on the 5V0-21.21 exam, and I owe a great deal of gratitude to Killexams.com. Their exam simulator was my primary resource for studying, and it provided me with a reliable passing score. Their platform is professional and trustworthy, and it gets two thumbs up from me.

---