API-570 : Certified API 570 Piping inspectors Exam

API-570 Dumps
API-570 Braindumps
API-570 Real Questions
API-570 Practice Test
API-570 Actual Questions


API
API-570
Certified API 570 Piping inspectors
https://killexams.com/pass4sure/exam-detail/API-570
Question: 32
What is the minimum holding time of SA-106 Grade B, 1 inch thick material?
A. 2.4 hours
B. 2 hours
C. 1 hour
D. not specified
Answer: C
Question: 33
What is the working pressure of a 150 Ib. flange, SA 350 Gr.LF6 CL 1, used at 400°F?
A. 230 psig
B. 200 psig
C. 170 psig
D. 140 psig
Answer: B
Question: 34
What is the minimum class flange that can be used if the material is SA 351 Gr.C F8C, temperature 950?F and
working pressure is 1930 psig
A. 800
B. 900
C. 1500
D. This material can not be used at this temperature
Answer: C
Question: 35
The preheat zone shall extend beyond each edge of a pipe weld
A. 1â
B. 2â
C. 2T
D. 3T
Answer: A
Question: 36
What is the root face limitation as listed on the attached WPS and PQR
A. 3/32â
B. 1/8â
C. No limit
D. Not designated
Answer: D
Question: 37
If the supporting PQR is used, are the P-noâs correct on the attached WPS?
A. Yes
B. No
C. Could be if properly preheated
D. Not enough information
Answer: B
Question: 38
Is the thickness range on the WPS supported by the PQR?
A. Yes
B. No
C. Re qualification is required by API 570
D. Re qualification is required by ASME Section V
Answer: B
Question: 39
Is the attached PQR properly qualified?
A. No, because RT is not allowed during PQR qualification
B. No, because there are not enough tensile tests
C. No, because peening is allowed by ASME B31.3
D. Yes
Answer: B
Question: 40
What should have been the correct number and type of guide bends on the PQR?
A. 6 side bends
B. 2 face and 2 root bends
C. 1 side, 1 face and 1 root bend
D. No side bends required
Answer: D
Question: 41
According to API 570, a(n) is a person who assists the inspector by performing specific NDE testing.
A. NDE technician
B. Inspector assistant
C. Level II inspector
D. Examiner
Answer: D
Question: 42
More than one contractor, manufacturer or installer may simultaneously qualify a welder. In such case, each
participating organization shall be represented by during the test.
A. A certified welding inspector
B. A responsible employee
C. The welderâs supervisor
D. A welding engineer
Answer: B
Question: 43
Which of the following best describes API 574?
A. code
B. Standard
C. specification
D. Recommended practice
Answer: D
Question: 44
The potential for personnel exposure is deemed to be significant in which fluid service?
A. Category M fluid service
B. High pressure fluid service
C. Normal fluid service
D. Category B fluid service
Answer: A
Question: 45
When an injection point circuit for the purpose of inspection is designated, the recommended up stream limit of the
injection point circuit shall be the greater of ?
A. minimum 12 inches
B. maximum 12 inches
C. three pipe diameters
D. both A and C
Answer: D
Question: 46
can cause flame detectors used to indicate a furnace or boiler fire to give false indications on control panels.
A. Welding or related repairs on piping
B. Piping alterations in the shop
C. Ultrasonic inspection
D. Radiographic inspection
Answer: D
Question: 47
After application of a non destructive evaluation technique, any resulting evidence is commonly referred to as
A. A crack
B. porosity
C. a leak
D. an indication
Answer: D
Question: 48
API 570 applies to piping systems for process fluids such as:
A. Firewater
B. Plumbing, sanitary sewers and storm sewers
C. Raw, intermediate, and finished products.
D. Piping systems on trucks, ships and barges
Answer: C
Question: 49
Which of the following applies to socket welds in piping systems?
A. Should be avoided
B. Should be used in all welded piping
C. Should be welded using SAW only
D. Should be avoided where crevice corrosion may occur
Answer: D
Question: 50
Each piece of magnetizing equipment shall be calibrated
A. at the beginning of each shift
B. at least once a year or whenever the equipment has been subject to major electrical repair
C. whenever the technician feels like it
D. at least once every 90 days
Answer: B

User: Kiara***** I passed the api-570 exam using Killexams.com and received my certificate. I have done all my certifications with Killexams.com and keep coming back for their bundles. The fact that I can practice on my computer at home and see the same questions as in the exam simulator is amazing. Thanks to Killexams.com, I have reached the professional level, and I am happy with where I am in my career.

User: Lyudmila***** Joining Killexams.com was the best decision of my life. I was excited because I knew that I would pass my API-570 exam and become the first person in my organization with this qualification. I turned out to be right, and using the web resources provided by Killexams.com, I passed my API-570 exam and made everyone proud. It was a happy feeling, and I recommend that any other student who wants to feel the same should give Killexams.com a try.

User: Stella***** Although I was confident in my knowledge of api-570, this was my first experience with this company. I used killexams.com questions and answers with the exam simulator software to prepare for my api-570 exam, and I felt very assured.

User: Taina***** I am delighted to have used Killexams.com instruction kit to pass the api-570 exam and become certified. Their coaching device is clear and dependable, and I am grateful for the actual questions within the package. As a busy IT professional, I could not afford to study full-time for weeks or months, and Killexams.com allowed me to streamline my preparation time and still achieve incredible results. It is a remarkable solution for IT professionals looking to pass the api-570 exam.

User: Matias***** Thanks to killexams.com, I passed the API-570 exam with a high score, and I am grateful for their professional and reliable services. The API-570 exam simulator was my primary data source, and it helped me achieve a strong passing score on the exam. Thumbs up from me!

---