AZ-801 : Configuring Windows Server Hybrid Advanced Services Exam

AZ-801 Dumps
AZ-801 Braindumps AZ-801 Real Questions AZ-801 Practice Test
AZ-801 Actual Questions
killexams.com
Microsoft
AZ-801
Configuring Windows Server Hybrid Advanced Services
https://killexams.com/pass4sure/exam-detail/AZ-801
Question: 474
You manage a Windows Server 2022 failover cluster with three nodes and a Storage Spaces Direct (S2D) volume of 2 TB . The cluster uses a witness disk hosted in Azure Blob Storage. You need to calculate the minimum Azure Blob Storage size required for the witness disk, given a write throughput of 5 MB/s during peak failover events lasting 10 minutes.
1. 512 MB
2. 3 GB
3. 1 GB
4. 256 MB
r: B
nation: Peak write throughput is 5 MB/s for 10 minutes (600 seconds). Total data written = 5 MB/ 00 MB = 3 GB . The witness disk must accommodate this (3 GB) is correct.
on: 475
troubleshooting a Windows Server 2022 VM in Azure that fails to boot after a disk encryption u ed to access the boot logs using Azure Serial Console. Which command should you enter after ac ecial Administration Console (SAC)?
ump
si 1
tcfg /scan
r: C
nation: In the Azure Serial Console’s SAC, the command "ch -si 1" switches to the first channel t a command prompt, where you can then run "dir" or "type" to view boot logs (e.g., boot.log). The either don’t apply to SAC or are invalid in this context.
nce: https://docs.microsoft.com/en-us/azure/virtual-machines/troubleshooting/serial-console-windo
Answe
Expla s * 600
s = 30
Questi
You are pdate.
You ne cessing
the Sp
1. cmd
2. log d
3. ch -
4. boo
Answe
Expla o
launch other
options
Refere ws
Question: 476
You have a server named Server1 running Windows Server 2022. You need to configure a custom Performance Monitor data collector set to log CPU usage and disk I/O every 10 seconds to a file named "perfdata.blg" for 24 hours. Which PowerShell command should you use?
1. New-PerfCounterDataCollectorSet -Name "PerfSet" -Counter "\Processor(_Total)\% Processor Time", "\PhysicalDisk(_Total)\Disk Bytes/sec" -SampleInterval 10 -LogFile "perfdata.blg" -Duration "24:00:00"
2. Add-PerformanceLog -Name "PerfSet" -Metrics "\Processor(_Total)\% Processor Time", "\PhysicalDisk(_Total)\Disk Bytes/sec" -Frequency 10 -File "perfdata.blg" -Hours 24
3. Set-PerfMonitor -Name "PerfSet" -Counters "CPU", "DiskIO" -Interval 10 -Output "perfdata.blg" -Time 24h
4. logman create counter "PerfSet" -c "\Processor(_Total)\% Processor Time" "\PhysicalDisk(_Total)\Disk Bytes/sec" -si 10 -f bin -o "perfdata.blg" -max 1440
Answer: D
Explanation: The logman create counter command creates a data collector set, specifying counters, sample interval (seconds), binary file output, and maximum duration in minutes (1440 minutes = 24 hours). Option B uses correct syntax. Other options use invalid cmdlets or parameters.
Reference: https://docs.microsoft.com/en-us/windows-server/administration/windows-commands/logman
on: 477
ed to configure a 5-node cluster with a floating IP of 10.0.0.200 for a SQL Server FCI. What is t um number of IP addresses required?
r: D
nation: 5 nodes = 5 IPs, 1 floating IP for SQL FCI = 6 total. The cluster IP is separate from the r CI setup.
on: 478
securing a hybrid AD environment. You need to prevent users from reusing the last 10 password Group Policy setting should you configure?
imum Password Age = 10 days ximum Password Age = 10 days
sword Must Meet Complexity = Enabled
Questi
You ne he
minim
1. 7
2. 5
3. 4
4. 6
Answe
Expla ole IP
in an F
Questi
You are s.
Which
1. Min
2. Ma
3. Pas
4. Enforce Password History = 10
Answer: D
Explanation: Enforce Password History = 10 ensures users cannot reuse their last 10 passwords. Minimum/Maximum Password Age controls duration, not history, and complexity enforces character rules, not reuse prevention.
Question: 479
You are securing an Azure VM running Windows Server 2022 with Microsoft Defender for Endpoint. You need to block a specific executable (malware.exe) using a custom indicator of compromise (IoC). Which PowerShell cmdlet should you use?
1. New-MpPreference -ExclusionPath "C:\malware.exe"
2. Set-MpPreference -AttackSurfaceReductionRules_Ids "BlockExe"
3. Set-MpPreference -DisableRealtimeMonitoring $false -IoC "malware.exe"
4. Add-MpPreference -IndicatorOfCompromise "malware.exe" -Action Block
Answer: D
nation: Add-MpPreference with an IoC allows you to define and block specific executables in Mi er for Endpoint, ensuring precise control over malware mitigation.
nce: https://docs.microsoft.com/en-us/microsoft-365/security/defender-endpoint/indicator-file
on: 480
ve a Storage Spaces Direct (S2D) cluster named Cluster2 with six nodes running Windows Server ed to create a 12 TB three-way mirror volume using 4 TB disks with ReFS and calculate the mini of disks required. Which PowerShell command should you use, and how many disks are needed?
sks; New-StoragePool -FriendlyName "S2D" -ResiliencySettingName ThreeWayMirror -Size 12T isks; New-Volume -StoragePoolFriendlyName "Cluster2" -FileSystem CSVFS_ReFS -MirrorLev 2TB
sks; New-Volume -StoragePoolFriendlyName "Cluster2" -FileSystem ReFS -ResiliencySettingNa
-NumberOfDataCopies 3 -Size 12TB
isks; New-Volume -StoragePoolFriendlyName "Cluster2" -FileSystem ReFS -PhysicalDiskRedun 12TB
sks; New-Volume -StoragePoolFriendlyName "Cluster2" -FileSystem CSVFS_ReFS - ncySettingName Mirror -Size 12TB
r: C
nation: A three-way mirror requires 3 copies, so 12 TB usable needs 36 TB raw capacity (12 TB x TB disks, 9 disks are required (36 TB / 4 TB). The correct command uses New-Volume with -
Expla crosoft
Defend Refere
Questi
You ha 2022.
You ne mum
number
1. 8 di B
2. 10 d el 3 -
Size 1
3. 9 di me
Mirror
4. 12 d dancy
3 -Size
5. 9 di Resilie
Answe
Expla 3).
With 4
NumberOfDataCopies 3 and -FileSystem ReFS for S2D) Option A matches this requirement. Reference: https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/plan-volumes
Question: 481
You manage a hybrid environment with an on-premises Windows Server 2022 domain controller and Azure AD Connect. You need to synchronize a custom AD DS attribute "departmentCode" to Azure AD as "extensionAttribute2" with a transformation rule that prepends "D-". Which two PowerShell commands should
you use?
1. New-ADSyncRule -Name "TransformDept" -SourceADAttribute "departmentCode" -TargetAttribute "extensionAttribute2" -ValueRule ' "D-" + [departmentCode]'
2. Set-ADSyncAttributeFlow -Source "departmentCode" -Target "extensionAttribute2" -Transformation ' "D-"
+ $source'
3. New-ADSyncRule -Name "TransformDept" -SourceADAttribute "departmentCode" -TargetAttribute "extensionAttribute2" -FlowType Expression -Expression ' "D-" + [departmentCode]'
4. Update-ADSyncSchema -Attribute "departmentCode" -MapTo "extensionAttribute2" -Prefix "D-"
5. Set-ADSyncConnector -Name "ADConn" -Attribute "departmentCode" -CustomValue "D-[departmentCode]"
nation: `New-ADSyncRule` with `-FlowType Expression` and `-Expression ' "D-" + [department a transformation rule to prepend "D-" to "departmentCode" and map it to "extensionAttribute2." pe, B/D/E use incorrect cmdlets or syntax.
on: 482
anage a Windows Server 2022 server with a failover cluster. You need to configure a File Share W zure file share. Which command sets this up?
ClusterQuorum -FileShareWitness "\storage.file.core.windows.net\share" -Credential $cred
-ClusterWitness -Type FileShare -Path "\storage.file.core.windows.net\share" ClusterResource -Name "Witness" -Share "\storage.file.core.windows.net\share" d-ClusterQuorum -FileShare "\storage.file.core.windows.net\share" -Auth $cred
r: A
nation: Set-ClusterQuorum -FileShareWitness configures a file share witness with credentials for Azure res. Other commands are invalid or incorrect.
on: 483
Answer: C
Expla Code]'`
creates A lacks
flow ty
Questi
You m itness
on an A
1. Set-
2. New
3. Set-
4. Ad
Answe Expla
file sha
Questi
You have a Windows Server failover cluster with a Hyper-V VM named VM11. You need to configure VM11 for live migration with a maximum of 2 simultaneous migrations and Kerberos authentication. Which PowerShell command should you use?
1. Set-VMHost -VirtualMachineMigrationAuthenticationType Kerberos -MaximumVirtualMachineMigrations 2
2. Enable-VMMigration -VMName "VM11" -AuthType Kerberos -MaxMigrations 2
3. Set-VMCluster -Name "Cluster1" -LiveMigrationLimit 2 -Authentication "Kerberos"
4. Configure-VMLiveMigration -VMName "VM11" -Kerberos -ConcurrentMigrations 2
Answer: A
Explanation: The Set-VMHost cmdlet configures live migration settings, including authentication type (Kerberos) and the maximum number of simultaneous migrations.
Question: 484
You have an Azure virtual machine named VM1 running Windows Server 2022 with Azure Arc enabled. You need to configure a custom script extension to execute a PowerShell script that modifies registry settings every time the VM restarts. The script must run with administrative privileges and log output to a file named "scriptlog.txt" in the C:\Logs directory. Which command should you use to deploy this extension?
AzVMCustomScriptExtension -ResourceGroupName "RG1" -VMName "VM1" -Name "RegScrip "https://storage.blob.core.windows.net/scripts/regscript.ps1" -RunAsAdmin -OutputPath gs\scriptlog.txt"
-AzVMExtension -ResourceGroupName "RG1" -VMName "VM1" -Name "RegScript" -Publishe soft.Compute" -ExtensionType "CustomScriptExtension" -TypeHandlerVersion "1.10" -Settings eUris" = "https://storage.blob.core.windows.net/scripts/regscript.ps1"; "commandToExecute" = shell.exe -File regscript.ps1"}
AzVMCustomScriptExtension -ResourceGroupName "RG1" -VMName "VM1" -Name "RegScrip "https://storage.blob.core.windows.net/scripts/regscript.ps1" -Run "powershell.exe -ExecutionPoli ricted -File regscript.ps1 > C:\Logs\scriptlog.txt"
oke-AzVMRunCommand -ResourceGroupName "RG1" -VMName "VM1" -CommandId owerShellScript" -ScriptPath "regscript.ps1" -Parameter @{"LogPath" = "C:\Logs\scriptlog.txt"}
r: C
nation: The Set-AzVMCustomScriptExtension cmdlet is used to deploy a custom script extension
M. The -Run parameter specifies the command to execute, and redirecting output with ">" ensur to "scriptlog.txt". The script runs with elevated privileges by default. Option C is invalid as -
Admin and -OutputPath are not parameters of this cmdlet. Option D uses Invoke-AzVMRunCom is for one-time execution, not recurring on restart.
nce: https://docs.microsoft.com/en-us/powershell/module/az.compute/set-azvmcustomscriptextensi
on: 485
Set- t" -
FileUri "C:\Lo
New r
"Micro
@{"fil "power
Set- t" -
FileUri cy
Unrest
Inv "RunP
Answe
Expla to an
Azure V es
logging
RunAs mand,
which
Refere on
Questi
To migrate 500 GB of data from an on-premises Windows Server 2019 to Azure Blob Storage using AzCopy, which command ensures the fastest transfer with MD5 checksum validation?
1. azcopy copy "C:\data\*" "https://mystorage.blob.core.windows.net/container" --md5-checksum
2. azcopy sync "C:\data" "https://mystorage.blob.core.windows.net/container" --validate-md5
3. azcopy cp "C:\data" "https://mystorage.blob.core.windows.net/container" --recursive --check-md5
4. azcopy transfer "C:\data" "https://mystorage.blob.core.windows.net/container" --recursive --md5
Answer: C
Explanation: azcopy cp with --recursive uploads directories and --check-md5 validates integrity using MD5,
optimizing speed with parallel transfers. Sync is for synchronization, not one-time upload. Reference: https://docs.microsoft.com/en-us/azure/storage/common/storage-use-azcopy
Question: 486
ble-PSRemoting -Force
all-WindowsFeature -Name RSAT-AD-PowerShell
Item -Path WSMan:\localhost\Client\Auth\AzureAD -Value $true PSSessionConfiguration -Name Microsoft.PowerShell -Authentication AzureAD
r: C
nation: To enable Azure AD authentication for remote PowerShell sessions on a Windows Server, onfigure the WSMan client authentication settings to allow Azure AD . The command Set-Item -P n:\localhost\Client\Auth\AzureAD -Value $true enables this. Enable-PSRemoting only enables re
specifying Azure AD, Install-WindowsFeature installs tools but doesn’t configure authentication, SessionConfiguration is incorrect as it applies to session configurations, not Azure AD auth.
on: 487
ubleshoot a Windows Server 2022 VM in Azure with high CPU usage, which Event ID in the Syst es a process exceeding 90% CPU for over 5 minutes?
nt ID 1001
nt ID 2004
nt ID 2031
nt ID 1074
r: B
You manage a hybrid environment with an on-premises Windows Server 2022 failover cluster named Cluster1 synchronized with Azure AD . You need to configure Cluster1 to use Azure AD authentication for cluster management over a remote PowerShell session. Which command should you run on each cluster node to enable this?
1. Ena
2. Inst
3. Set-
4. Set-
Answe
Expla you
must c ath
WSMa moting
without and
Set-PS
Questi
To tro em log
indicat
1. Eve
2. Eve
3. Eve
4. Eve
Answe
Explanation: Event ID 2004 from the Resource-Exhaustion-Detector indicates a process consuming excessive CPU (e.g., >90% for 5+ minutes). Other IDs relate to different issues (shutdown, app errors).
Reference: https://docs.microsoft.com/en-us/windows-server/administration/windows-event-log
Question: 488
Your hybrid network includes an on-premises Windows Server 2022 server named SRV4. You need to deploy Azure Arc and configure it to use a custom proxy server at http://proxy1:8080 with NTLM authentication.
Which command should you run?
1. azcmagent config set proxy.url "http://proxy1:8080" --authentication NTLM
2. Connect-AzArcServer -Proxy "http://proxy1:8080" -AuthType "NTLM" -ResourceGroup "RG1"
3. azcmagent connect --proxy "http://proxy1:8080" --auth NTLM --resource-group "RG1" --tenant-id "tenant1"
4. Install-AzArcAgent -ProxyServer "http://proxy1:8080" -Authentication "NTLM"
Answer: C
on: 489
anage a Windows Server 2022 Hyper-V cluster with two nodes, HV1 and HV2, hosting a VM na ou need to configure Hyper-V Replica to an Azure VM with a replication frequency of 30 secon
as a 100 GB VHDX and generates 10 MB/s of write IOPS. Which setting must you configure to ensure tion succeeds?
ble-VMReplication -VMName "VM1" -Destination "AzureVM1" -Frequency 30 -CompressionEn VMReplication -VMName "VM1" -ReplicationFrequencySec 30 -RecoveryHistory 2 VMReplication -VMName "VM1" -ReplicationFrequencySec 30 -VSSSnapshotFrequency 1
ble-VMReplication -VMName "VM1" -ReplicaServerName "AzureVM1" -ReplicationFrequencyS
r: B
nation: Hyper-V Replica to Azure requires the Set-VMReplication cmdlet to adjust the replication ncy to 30 seconds. The RecoveryHistory parameter ensures recovery points are retained.
on: 490
configuring a Windows Server 2022 VM to use Azure Disk Encryption with a custom key encry EK) stored in Azure Key Vault. Which command enables this?
Explanation: The azcmagent connect command configures Azure Arc connectivity, and option correctly specifies the proxy and NTLM authentication.
Questi
You m med
VM1. Y ds.
VM1 h
replica
1. Ena abled
2. Set-
3. Set-
4. Ena ec 30
Answe Expla
freque
Questi
You are ption
key (K
1. Enable-AzDiskEncryption -VMName "VM1" -KEK "https://vault.vault.azure.net/keys/KEK1"
2. Set-AzVMDiskEncryptionExtension -ResourceGroupName "RG1" -VMName "VM1" -KeyVaultUrl "https://vault.vault.azure.net" -KeyEncryptionKey "KEK1"
3. New-AzDiskEncryptionPolicy -KeyVault "vault" -KEKName "KEK1"
4. Set-AzVMEncryption -ResourceGroupName "RG1" -VMName "VM1" -KeyEncryptionKeyUrl "https://vault.vault.azure.net/keys/KEK1"
Answer: B
Explanation: Set-AzVMDiskEncryptionExtension enables Azure Disk Encryption with a KEK from Azure Key Vault, specifying the vault URL and key name for secure encryption.
Reference: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/disk-encryption-powershell

User: Olesya***** As someone deeply involved in the IT field, tackling the AZ-801 exam was absolutely essential for my career growth. However, my demanding schedule made comprehensive preparation feel like an insurmountable challenge. I decided to try killexams.com practice tests, dedicating just two weeks before the exam, and I was able to confidently answer all the questions well within the time limit. The answers were incredibly easy to recall, making the entire preparation process much smoother. It truly functioned as a thorough reference guide, and I was genuinely amazed by my results.

User: Winnie***** I owe a debt of gratitude to Killexams.com for providing such high-quality exam practice tests. The az-801 exam practice tests were valid and helped me achieve a 95% score. I plan to return for additional test prep and highly recommend Killexams.com to anyone looking for comprehensive study materials.

User: Pearl***** Testprep practice tests eliminated exam loneliness, with supportive educators ensuring my AZ-801 exam success. Their round-the-clock assistance helped me answer all questions, and I am grateful for their extraordinary guidance.

User: Catherine***** Prior to enrolling in the Killexams.com software, I had attempted the az-801 practice questions without success. After joining the program, I realized that the problem was with the practice books I was using. The Killexams.com designed books are more effective and cover the entire syllabus for az-801 exam preparation.

User: Ludmilla***** As a first-time user of killexams.com, I felt confident in the AZ-801 field after using their practice tests and exam simulator. The well-organized resources covered all essential topics, making my preparation seamless. I highly recommend killexams.com for its user-friendly and effective study tools.

---