ECP-206 : Certified Associate - IP Networking Exam

ECP-206 Dumps
ECP-206 Braindumps
ECP-206 Real Questions
ECP-206 Practice Test
ECP-206 Actual Questions


Ericsson
ECP-206
Certified Associate - IP Networking
https://killexams.com/pass4sure/exam-detail/ECP-206
Question: 140
Which network is reserved as a private network according to RFC1918?
A. 172.16.1.0/9
B. 10.254.1.0/24
C. 193.168.1.0/24
D. 172.15.1.0/24
Answer: B
Explanation:
According to RFC1918, there are three network blocks reserved as private networks that are not allocated to any
specific organization and are not routable on the public Internet.
These are:
Question: 141
Which action will influence BGP route selection within your AS?
A. reducing number of hops in the network
B. changing the default value of the local preference
C. changing the default link metric
D. changing the administrative distance for eBGP
Answer: B
Explanation:
The action that will influence BGP route selection within your AS is changing the default value of the local preference
attribute. The local preference attribute is used to indicate the preference of a path among multiple paths learned from
different external BGP neighbors or autonomous systems (ASes). The higher the local preference value, the more
preferred the path is within your AS, and vice versa. The default value of local preference is 100, but you can change it
using route maps or other configuration methods on your BGP routers.
Reference: Ericsson IP Networking - Routing Protocols, BGP Attributes and Path Selection, BGP Local Preference
Attribute: Controlling Traffic Like a Pro
Question: 142
Which statement is true about LDP?
A. LDP and IGP both exchange their databases every 60 seconds.
B. LDP and IGP both exchange their databases every 30 seconds.
C. LDP relies on IGP for all routing-related decisions.
D. LDP performs routing functions along with IG
Answer: C
Explanation:
LDP relies on IGP for all routing-related decisions. LDP is a protocol that distributes labels in an MPLS environment,
but it does not perform any routing functions. LDP uses the underlying routing information provided by an IGP, such
as OSPF or IS-IS, to forward label packets. LDP and IGP do not exchange their databases at regular intervals, but
rather use hello messages to maintain adjacencies and sessions.
Reference: Ericsson IP Networking - Routing Protocols, Label Distribution Protocol - Wikipedia
Question: 143
Which two statements are true about priority queuing (PQ)? (Choose two.)
A. Traffic in the highest priority queue will experience the least amount of jitter and delay compared to traffic in the
other queues.
B. Traffic in the highest priority queue is only reserved for voice traffic.
C. Traffic in lower priority queues can be starved of bandwidth.
D. Traffic in all queues are always guaranteed a minimum bandwidth.
Answer: A,C
Explanation:
Priority queuing (PQ) is a queuing method that establishes four interface output queues that serve different priority
levels: high, medium, normal, and low. Traffic in the highest priority queue will experience the least amount of jitter
and delay compared to traffic in the other queues, because PQ always services the higher-priority queues first.
However, this can also cause traffic in lower priority queues to be starved of bandwidth, especially if the highest
priority queue is oversubscribed. Traffic in the highest priority queue is not only reserved for voice traffic, but can also
include network control and routing traffic. Traffic in all queues are not always guaranteed a minimum bandwidth,
because PQ does not provide any bandwidth reservation mechanism.
Reference: Quality of Service (QoS) Queues and Queuing Explained, Chapter: Configuring Priority Queueing - Cisco
Question: 1
Review the exhibit.

Given the routing table shown in the exhibit, what is the next-hop to reach the host 192.168.1.129?
A. 10.126.131.251
B. 10.126.131.252
C. 10.126.131.250
D. 10.126.131.248
Answer: C
Explanation:
The next-hop to reach the host 192.168.1.129 is 10.126.131.250. This can be determined by looking at the routing table
in the exhibit. The host 192.168.1.129 falls within the range of the network 192.168.1.64/26, which has a next-hop of
10.126.131.250.
Reference: Ericsson IP Networking - IP Addressing, Software Installation and Upgrade Overview (Junos OS)
Question: 145
Which two statements are true about link-state routing protocols? (Choose two.)
A. The advertisement exchange is mainly triggered by a change in the network.
B. Each router uses a reliable update mechanism to exchange topology information with its neighbors.
C. Link-state routing protocols mainly use hop-counts to determine the link cost
D. A distance vector algorithm is very processor intensive compared to Dijkstra's algorithm.
Answer: A,B
Explanation:
Link-state routing protocols are one of the two main classes of routing protocols used in packet switching networks for
computer communications, the other being distance-vector routing protocols. Examples of link-state routing protocols
include Open Shortest Path First (OSPF) and Intermediate System to Intermediate System (IS-IS). The basic concept
of link-state routing is that every node constructs a map of the connectivity to the network, in the form of a graph,
showing which nodes are connected to which other nodes. Each node then independently calculates the next best
logical path from it to every possible destination in the network. Each collection of best paths will then form each
nodeās routing table.
Two statements that are true about link-state routing protocols are:
The advertisement exchange is mainly triggered by a change in the network. Link-state routing protocols use a
flooding mechanism to distribute information about the network topology to all routers in the same area or domain.
This information is encapsulated in link-state packets (LSPs) or link-state advertisements (LSAs), which contain
information about the router, its directly connected links, and the state of those links. LSPs or LSAs are sent only
when there is a change in the topology, such as a link failure or recovery, or when a periodic refresh timer expires.
This way, link-state routing protocols can quickly adapt to network changes and maintain an accurate and consistent
view of the network.
Each router uses a reliable update mechanism to exchange topology information with its neighbors. Link-state routing
protocols use a reliable update mechanism to ensure that all routers receive and acknowledge the LSPs or LSAs sent by
their neighbors. This mechanism involves sending hello messages to establish and maintain adjacencies with
neighbors, sending acknowledgment messages to confirm the receipt of LSPs or LSAs, and requesting missing or
outdated LSPs or LSAs from neighbors. This mechanism ensures that all routers have a synchronized database of LSPs
or LSAs, which is used to build a complete network connectivity map and to calculate the shortest path to destinations.
Reference: Link-state routing protocol - Wikipedia, Ericsson IP Networking - Routing Protocols
Question: 146
Which operating system is used in Ericsson Router 6000 products?
A. SE-OS
B. ERS
C. ERS
D. IPOS
E. Junos
Answer: C
Explanation:
The operating system used in Ericsson Router 6000 products is ERS (Ericsson Router Software). ERS is based on
IPOS (IP Operating System), which is a common operating system for Ericssonās IP portfolio. ERS provides advanced
features and functionality for IP transport, such as MPLS, Segment Routing, QoS, IPSec, synchronization, SDN, and
more. ERS also supports seamless integration with Ericsson
Radio System and Ericsson Network Manager.
Reference: Router 6000 Series - Ericsson, Router 6675 Datasheet - Winncom
Question: 147
What network information is, without additional configuration, shared between two iBGP neighbors by default?
A. BGP routes learned from an OSPF neighbor
B. IP address information of loopback interfaces
C. BGP routes learned from eBGP neighbors
D. IP address information from all directly connected interfaces
Answer: C
Explanation:
iBGP works by exchanging routing information between two or more routers within an AS. Each router sends its own
routing table to its neighbors, which contains information about the networks it knows and how they can be reached
from that router. By default, iBGP neighbors only share BGP routes learned from eBGP neighbors, which are routers
in different ASes. This is because iBGP assumes that all routers within an AS have consistent internal routing
information provided by an IGP, such as OSPF or IS-IS. Therefore, iBGP neighbors do not need to share IP address
information of loopback interfaces or directly connected interfaces, unless explicitly configured to do so by using
commands such as neighbor update-source or network.
Reference: iBGP Ultimate Guide | How iBGP Is Different From eBGP, Ericsson IP Networking - Routing Protocols
Question: 148
An IS-IS router has been assigned the NSAP address: 49.00F0.0100.5012.3010.00.
What is the Area ID to which the router belongs?
A. 49.00F0
B. 49.00F0.0100
C. 5012.3010.00
D. 00F0 0100
Answer: B
Explanation:
The Area ID to which the router belongs is 49.00F0.0100. The Area ID is a variable-length field in the NSAP address
that identifies the area to which the router belongs. The Area ID can be between 1 and 13 bytes long, but it must start
and end with an octet (8 bits). The NSAP address is composed of three parts: the authority and format identifier (AFI),
the area ID, and the system ID. The AFI is a one-octet field that indicates the format and authority of the rest of the
address. The system ID is a fixed-length field of six octets that uniquely identifies the router within an area. The NSAP
address also has a
network selector (NSEL) field, which is a one-octet field that identifies the network layer service to which a packet
should be sent. For IS-IS routers, the NSEL must always be 00.
In this question, the NSAP address is 49.00F0.0100.5012.3010.00.
This means that:
The AFI is 49, which indicates a private address.
The Area ID is 00F0.0100, which is four octets long and starts and ends with an octet.
The system ID is 5012.3010, which is six octets long and identifies the router within the area.
The NSEL is 00, which indicates IS-IS.
Therefore, the answer is B.
Reference: Ericsson IP Networking - Routing Protocols, IS-IS NSAP address - Cisco Community, Understanding IS-
IS NSAP Addresses - Todd Lammle, LLC, IS-IS - Nokia, Network service access point address - Wikipedia
Question: 149
P routers forward packets based on the ______.
A. flow label
B. VPN label
C. LSP label
D. inner label
Answer: C
Explanation:
P routers forward packets based on the LSP label. The LSP label is the label that corresponds to the label-switched
path (LSP) that is established between two PE routers in an MPLS network. The LSP label is also called the outer
label or the transport label, because it is used to transport packets across the MPLS core network. P routers are also
called LSRs (label switch routers) or transit routers, because they switch packets based on their labels or remove the
labels. P routers do not need to look at the IP header or any other information in the packet, except for the top label in
the label stack. P routers perform one of three possible operations on labels: swap, pop, or PHP (penultimate hop
popping). In a swap operation, the label is swapped with a new label, and the packet is forwarded along the path
associated with the new label. In a pop operation, the label is removed from the packet, and the packet is forwarded
based on its IP header or another label in the stack. In a PHP operation, the label is removed from the packet at the last
P router before reaching the egress PE router, and the packet is forwarded without any label to the egress PE router.
The LSP label is different from other types of labels that may be used in MPLS networks, such as VPN labels or
service labels. These labels are used to identify different VPNs or services that run over MPLS networks, such as
Layer 2 VPNs, Layer 3 VPNs, traffic engineering, or QoS. These labels are also called inner labels or payload labels,
because they are related to the payload of the packet. These labels are not used by P routers for forwarding decisions,
but only by PE routers for delivering packets to their destinations.
Therefore, the answer is C.
Reference: Ericsson IP Networking - Routing Protocols, MPLS Fundamentals: Forwarding Labeled Packets - Cisco
Press, MPLS Labels and Devices - NetworkLessons.com, Multiprotocol Label Switching - Wikipedia, VPN Packet
Forwarding > MPLS/VPN Architecture Overview | Cisco Press, Basic concepts - Hewlett Packard Enterprise
Question: 1
Review the exhibit.

In the exhibit, which action is performed by router R4?
A. pop
B. push
C. PHP
D. swap
Answer: D
Explanation:
In the exhibit, router R4 is performing a swap action. This means that router R4 is replacing the incoming label with a
new label and forwarding the packet to the next hop along the LSP. In this case, router R4 receives a packet with label
20 from router R3 and swaps it with label 30 before sending it to router R5.
The exhibit shows an example of an MPLS network with four routers: R1, R2, R3, and R4. Router R1 is the ingress
PE router and router R4 is the egress PE router. Router R2 and R3 are P routers. Router R1 assigns label 10 to the
packet and sends it to router R2. Router R2 swaps label 10 with label 20 and sends it to router R3. Router R3 swaps
label 20 with label 30 and sends it to router R4. Router R4 removes label 30 from the packet and forwards it based on
its IP header ā or another label in the stack. Therefore, the answer is D.
Reference: MPLS Label Switching | MPLS Operation | Push, Swap,Push IPCisco, A Complete Guide to Multiprotocol
Label Switching (MPLS) - G2, Multiprotocol Label Switching - Wikipedia
Question: 151
In a company network, a host sends an Ethernet frame destined to the address FF:FF:FF:FF:FF:FF.
What will an Ethernet switch do with this frame?
A. It will forward the frame to only one port.
B. It will forward the frame to all ports.
C. It will drop it.
D. It will send the frame only to management port.
Answer: B
Explanation:
An Ethernet switch will forward the frame to all ports when the destination address is FF:FF:FF:FF:FF:FF. This is
because this address is the broadcast MAC address, which means that the frame is intended for all devices on the same
LAN segment. The switch does not need to look up its MAC address table to find a matching entry for this address,
but simply floods the frame out of all ports except the one where it received the frame. This way, the frame reaches
every device on the LAN segment, regardless of their MAC addresses.
Reference: Ethernet - Wireshark, Broadcast MAC Address - omnisecu.com
Question: 152
Which two statements are true about route summarization? (Choose two.)
A. It reduces the size of a routing table.
B. It reduces signaling.
C. It summaries the routing table entries into a default route
D. It improves the best route calculation.
Answer: A,B
Explanation:
Route summarization is a technique that reduces the number of routes that a router advertises to its neighbors by
creating a single summary route that covers multiple subnets or networks.
Route summarization has several benefits, such as:
It reduces the size of a routing table, which saves memory and CPU resources on the router. A smaller routing table
also improves the lookup efficiency and convergence time of the routing protocol.
It reduces signaling, which means that less bandwidth is consumed by routing updates and less processing is required
by neighboring routers. This also enhances the stability and scalability of the network, as fewer routing changes are
propagated.
It improves route aggregation, which means that more specific routes are replaced by a less specific route that can be
advertised to other autonomous systems or routing domains. This simplifies the inter-domain routing and hides the
internal topology details.
Route summarization does not necessarily summarize the routing table entries into a default route, although a default
route can be considered a special case of route summarization where all destinations are covered by one route. Route
summarization also does not improve the best route calculation, as it may introduce suboptimal routing or black holes
if not done properly.
Reference: Introduction to Route Summarization - NetworkLessons.com, Route
Summarization > Example for Understanding Route Summarization - Cisco Press
Question: 153
Which two label actions are performed by a P router? (Choose two.)
A. push
B. php
C. drop
D. swap
Answer: A,B,D
Explanation:
A P router is a provider router that is part of the service providerās core network in an MPLS environment. A P router
does not have any customer routes or VPN information, but only has information about how to reach other P routers
and PE routers in the same MPLS domain. A P router performs label switching, which means that it forwards labeled
packets based on their top label in the label stack. A P router can perform two possible label actions:
Swap: The P router replaces the incoming label with a new label that corresponds to the next hop along the label-
switched path (LSP). The new label is determined by looking up the label forwarding information base (LFIB) based
on the incoming label and interface.
PHP: The P router removes the top label from the packet at the penultimate hop before reaching the egress PE router.
This is done to avoid an extra lookup on the egress PE router, which can forward the packet based on its IP header or
another label in the stack.
A P router does not perform push or drop actions on labels. A push action means adding one or more labels to the
packet, which is done by an ingress PE router when initiating an LSP. A drop action means discarding a packet, which
is done by any router when there is no matching entry in its LFIB or routing table. Reference: ā Provider (P) Router in
IP MPLS Network - Cisco Community, MPLS Fundamentals: Forwarding Labeled Packets - Cisco Press, MPLS Label
Switching | MPLS Operation | Push, Swap, Push IP Cisco
Question: 154
How is a BGP session established between two routers?
A. The BGP router sends a unicast NOTIFICATION message.
B. The BGP router sends a unicast OPEN message.
C. The BGP router sends a multicast CONNECT message.
D. The BGP router sends a multicast HELLO packet.
Answer: B
Explanation:
A BGP session is established between two routers by sending a unicast OPEN message. BGP uses TCP as its transport
protocol, which means that before exchanging any BGP information, a TCP connection must be established between
the routers. The TCP connection uses port 179 as both source and destination port. After establishing a TCP
connection, each router sends an OPEN message to its neighbor, containing parameters such as BGP version number,
AS number, hold time, BGP identifier, and optional capabilities. The OPEN message also serves as a keepalive
message for BGP. If both routers agree on these parameters, they proceed to exchange UPDATE messages containing
routing information and establish a BGP session.
A BGP router does not send a NOTIFICATION message to establish a session, but rather to terminate a session due to
an error or a manual shutdown. A BGP router does not send a CONNECT message, as this is a TCP state, not a BGP
message. A BGP router does not send a multicast HELLO packet, as this is an OSPF message, not a BGP message.
Reference: BGP Neighbor States > BGP Fundamentals | Cisco Press, Demystifying BGP Session Establishments -
Packet Pushers, The TCP/IP Guide - BGP Connection Establishment: Open Messages

User: Alma***** The quality of killexams.com is high enough to provide excellent ecp-206 exam preparation to the applicants. I have used their resources for the ecp-206 exam and found them to be of the highest quality, which helped me pass the exam quickly.

User: Abd***** killexams.com is a dependable indicator of college students and customers functionality for the ECP-206 exam.

User: Nessa***** With the help of killexams.com, I never feel alone during exams anymore. Their study material and teachers guidance are available at any time of the day, and all my questions are answered promptly. I am grateful to their friendly and helpful teachers for making it possible for me to pass my challenging ecp-206 exam with their study material, including self-study.

User: Helena***** I passed the ecp-206 exam on my first attempt, thanks to Killexams.com excellent question bank. Their material helped me apply my workbook knowledge in a question-and-answer format. Using their exam simulator, I gained a full idea of the exam paper, which proved invaluable during the exam. I am grateful to Killexams.com for their support and guidance.

User: Orina***** I am now ecp-206 certified thanks to the great collection of brain practice tests and exam preparation resources provided by Killexams.com. I used their materials for my ecp-206 certification last year, and this time around, I found their resources to be just as good. The questions are authentic, and the exam simulator works fine. I highly recommend using Killexams.com for exam preparation.

---