Certification Practice Test | PDF Questions | Actual Questions | Test Engine | Pass4Sure
H12-221 : Huawei Certified Network Professional-Implementing Enterprise Routing Network Exam
Huawei H12-221 Questions & Answers
Full Version: 134 Q&A
H12-221 Dumps
H12-221 Braindumps
H12-221 Real Questions
H12-221 Practice Test
H12-221 Actual Questions
Huawei
H12-221
Huawei Certified Network Professional-Implementing
Enterprise Routing Network
https://killexams.com/pass4sure/exam-detail/H12-221
Question: 118
When using routing policy for route filtering, which will be denied when the router prefix matching the following IP-
Prefix? (Multiple Choice)
A . 1.1.1.1/24
B . 1.1.1.1/32
C . 1.1.1.1/26
D . 1.1.1.2/16
Answer: ABC
Question: 119
The community attribute of the route set through routing policy, does it affect route routing?
A . Indirectly, the route can be classified by setting the Community property of the route, and then different route
routing related attributes such as Local_Pre, MED, etc. can be set according to the category, thereby affecting the
purpose of route selection.
B . Can’t be affected because the Community attribute of the route is non-transitional and can’t be passed between
routers.
C . Indirectly, the route can be classified by setting the community attribute of the route, and then different route
selection related attributes can be set according to the categories. These attributes can only include Local_Pre and
MED, thus affecting route selection.
D . After the router receives a route update with the community attribute No_Advertise, it will not be advertised
outside the local A
Answer: A
Question: 120
The master-slave relationship of OSPF neighbors is negotiated through DD packets.
A . True
B . False
Answer: A
Question: 121
The following is a partial output configuration of the Huawei router. The correct description about the configuration of
this part is:
A . When the router advertises its own BGP routes to BGP neighbor 12.12.12.2, it will be allowed to advertise routes
from 10.0.0.0 to 10.255.255.255.
B . When the router advertises its own BGP routes to BGP neighbor 12.12.12.2, it will allow advertisement of routes
from 172.16.0.0 to 172.31.255.255.
C . When the router advertises its own BGP routes to BGP neighbor 12.12.12.2, it will filter out the routes from
172.16.0.0 to 172.31.255.255.
D . When the router advertises its own BGP routes to BGP neighbor 12.12.12.2, it filters out all routes.
Answer: C
Question: 122
When a router running BGP receives a route with an unreachable next hop, what should I do?
A . Send an error message to the router that issued the Update.
B . Refused to join the BGP routing table and silently discarded.
C . Receive the route and add it to the BGP routing table. But this route will not be preferred by BGP and will not join
the IP routing table.
D . Receive the route, join the BGP routing table, and participate in the BGP routing rules. It may be optimized as the
best route and join the IP routing table.
Answer: C
Question: 123
OSPF supports multiple processes that can run multiple different OSPF processes on the same router, and they are
independent of each other. Routing interactions between different OSPF processes correspond to routing interactions
between different routing protocols.
A . True
B . False
Answer: A
Question: 124
In the static LACP mode, the correct description of the active link selection is: (Multiple Choice)
A . After a member interface is added to the Eth-Trunk in static LACP mode, the member interface sends the
information negotiation active port about the system priority, system MAC address, interface priority, and interface
number to the peer.
B . The higher the system LACP priority is, the higher the priority is. At both endsI of the devices, select the system
with the larger LACP priority value as the active end. If the system LACP priority is the same, select the one with the
higher MAC address as the active end.
C . The passive end device determines the activity interface based on the active end interface LACP priority and
interface ID (interface number).
D . The interfaces selected by two-end device are inconsistent and the data can be forwarded normally.
Answer: AC
Question: 125
The OSFF NBMA network requires that routers in the network must select DR and BDR; otherwise, they can’t
work.
A . True
B . False
Answer: B
Question: 126
On the device running MSTP obtain the information as shown in the figure. Note that the status of the port on Ethernet
1/0/13 in Instance 1 is:
A . Forwarding
B . Discarding
C . ALTE
D . NONE
Answer: B
Question: 127
The following is a partial configuration of a router. The correct description about this part of the configuration is:
A . On the 10.0.192.0/8 network segment, the route with a mask length of 18 will be matched to the prefix list, the
matching rule is allowed.
B . On the 10.0.192.0/8 network segment, the route with a mask length of 19 will be matched to the prefix list, the
matching rule is allowed.
C . On the 10.0.192.0/8 network segment, the route with a mask length of 20 will be matched to the prefix list, the
matching rule is allowed.
D . On the 10.0.192.0/8 network segment, the route with a mask length of 21 will be matched to the prefix list, the
matching rule is allowed.
Answer: A
Question: 128
In multicast network environment, if IGMPv2 hosts and IGMPv1 routers (hereinafter referred to as version 2 host and
version 1 router) are co-located on the same LAN, how do they work together?
A . version 1 router treats the IGMPv2 report as an invalid IGMP message type and ignores it.
B . When version 1 router is a valid IGMP querier, the version 2 host must send an IGMPv1 report.
C . When Version 2 host detects that the IGMP Querier is Version 1 router, it must always respond with the IGMPv1
report.
D . When version 2 host leaves, it still sends an IGMP leave message, and the message can’t be suppressed.
Answer: ABC
Question: 129
The following statement about OSPF neighbor information:
A . The router ID of this router is 1.1.1.1
B . The neighbor’s router ID is 2.2.2.2
C . The address of DR is 10.1.1.1
D . This router is Master
Answer: D
Question: 130
Port isolation enables the isolation of communication between different ports within the same VLAN of the same
switch.
A . True
B . False
Answer: A
Question: 131
In the same LAN, if some IGMPv1 routers exist in the LAN, IGMPv1 must be forcibly configured for all routers in
the subnet to use normally.
A . True
B . False
Answer: A
Question: 132
Port isolation provides users with more safer and more flexible networking solution.
The following description about port isolation, which is incorrect?
A . Port isolation can be used to configure Layer 2 isolation.
B . In the default mode, port isolation is Layer 2 isolation and Layer 3 interworking.
C . Port isolation must be configured on the ports that need to be configured for port isolation.
D . Port isolation command port-isolate enable specifies the port configuration in global mode.
Answer: D
Question: 133
Regarding the description of IGMPv1 and IGMPv2, the correct one is: (Multiple Choice)
A . IGMPv1 packet type does not include a leave member packets.
B . IGMPv2 packet type includes member leave packets
C . IGMPv1 supports universal group queries.
D . IGMPv2 supports only general group queries.
Answer: ABC
Question: 134
Compared with the OSPF protocol, which are the features of IS-IS protocol? (Multiple choices)
A . More types of network are supported
B . More types of areas are supported
C . The scalability of the protocol is better
D . Less protocol packets
Answer: CD
User: Henry***** I am now certified by H12-221, and this achievement was made possible with the help of Killexams.com exam simulator. The team at Killexams.com designed the exam simulator while keeping the needs and requirements of the students in mind. They have covered every topic in detail to keep the students informed and confident while taking the exam. |
User: Jacob***** I want to express my heartfelt gratitude to the killexams.com team for their questions and answers related to the h12-221 exam. It provided an excellent strategy for me to tackle the test with confidence, and I found many questions in the exam paper similar to the guide. I strongly believe that the guide remains valid, and the process of dealing with topics was exceptional. I hope to see more latest courses in the future for our convenience. |
User: Alejandro***** We all know that passing the H12-221 exam is a big deal, and when I passed my exam, I was over the moon. Killexams.com helped me achieve 87% marks, and my sister is now using the platform to study for the Cisco CCNA exam. |
User: Julie***** Passing the h12-221 exam was quite tough for me until I came across Killexams. Some of the topics were regarded as very tough to me, and I attempted to study from books, but failed as time was too short. In the end, the practice tests helped me understand the topics and wrap up my guidance in just 10 days. Killexams, you were an excellent guide, and my heartfelt thanks to you. |
User: Todor***** I am impressed to see that the h12-221 brain practice test is up to date with new modifications. These updates were unexpected, and I am excited to take the exam soon. I plan to order the new exam preparation materials from Killexams.com. |
Features of iPass4sure H12-221 Exam
- Files: PDF / Test Engine
- Premium Access
- Online Test Engine
- Instant download Access
- Comprehensive Q&A
- Success Rate
- Real Questions
- Updated Regularly
- Portable Files
- Unlimited Download
- 100% Secured
- Confidentiality: 100%
- Success Guarantee: 100%
- Any Hidden Cost: $0.00
- Auto Recharge: No
- Updates Intimation: by Email
- Technical Support: Free
- PDF Compatibility: Windows, Android, iOS, Linux
- Test Engine Compatibility: Mac / Windows / Android / iOS / Linux
Premium PDF with 134 Q&A
Get Full VersionAll Huawei Exams
Huawei ExamsCertification and Entry Test Exams
Complete exam list