HPE0-S54 : Designing HPE Server Solutions Exam

HPE0-S54 Dumps
HPE0-S54 Braindumps
HPE0-S54 Real Questions
HPE0-S54 Practice Test
HPE0-S54 Actual Questions


HP
HPE0-S54
Designing HPE Server Solutions
https://killexams.com/pass4sure/exam-detail/HPE0-S54
Question #98 Section 1
A customer needs a solution to run a read-intensive workload. You propose the following configuration:
✑ HPE ProLiant DL380 Gen10 server
✑ HPE Smart Array P408e-p SR
✑ 6 SFF SAS HDD drives
✑ 1 SSD drive
✑ RedHat Enterprise Linux 7.0 operating system
The customer needs to lower latency while minimizing investment in new SSD drives.
Which HPE Storage technology most effectively lowers latency of the HDD storage?
A. HPE 12Gb SAS Expander
B. HPE Secure Encryption
C. HPE SmartCache
D. HPE SSD Smart Path
Answer: C
Question #99 Section 1
A customer plans to use RESTful API to deploy their rack of DL380 Gen10 systems. How does use of this protocol support the customer? (Select two.)
A. support multiple scripting languages
B. Secure remote scripting
C. Ability to run scripts against multiple servers
D. Boot via SFTP
E. Boot via HTTP
Answer: AB
Incorrect answer:
C: RESTFUL APIs cannot run scripts against multiple servers.
Question #100 Section 1
A customer is using a DL380 Gen10. They attempt to boot an installation media ISO with iLO Virtual Media, and the system fails to access the ISO. What are the most
likely causes of this issue? (Select two.)
A. HPSSA drives are configured for RAID 1 and not RAID 5
B. Legacy Boot is not enabled and the media is not UEFI compatible
C. Secure Boot has derived access to the ISO
D. The ISO operating system is not supported by HPE
E. UEFI is not configured for iSCSI initiator support
Answer: CD
Question #101 Section 1
A customer needs a new compute environment based on HPE Synergy with VMware vSphere 6.5. This needs to interact with the customer's exiting network consisting of
300 independent global sites. Each site has 15 unique VLANs. What network technologies would you recommend to meet the customer requirements?
A. NVGRE increasing the amount of separated Layer 2 segments
B. VxLAN as it allows flexibility and suitable for multitenant environment
C. RDMA as it increases host efficiency and virtualization performance
D. VLANs as it supports up to 4094 VLAN ids
Answer: B
Question #102 Section 1
A customer reports a recent SSD drive failure in an HPE D2220sb Storage Blade that hosts its Virtual Desktop Infrastructure environment. The customer is concerned about
the remaining expected lifetime of the SSD drives in its array. Which tool includes the SmartSSD Wear Gauge report that identifies drives at risk of failure?
A. HPE Smart Storage Administrator
B. HPE OneView (Volumes screen)
C. Option ROM Configuration for Arrays
D. HPE SmartCache
Answer: A
Reference -
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04455150
Question #103 Section 1
A customer wants to use iLO Federation to manage firmware deployments with HPE SUM. Which options are included? (Select two.)
A. Automatically discover iLO Federation groups on the same management network
B. Apply updates to all members of iLO Federation group with an iLO standard license
C. iLO federation is leveraging ICsp functionality to update firmware
D. Update all applicable firmware on HPE ProLiant servers through the iLO using offline deployment
E. Update the iLO firmware and system ROM offline through the iLO Federation group
Answer: BD
Reference:
https://support.hpe.com/hpsc/doc/public/display?docId=c04774377
Question #104 Section 1
A customer is looking to add StoreVirtual VSA to their HPE Synergy environment. Which questions should you ask to ensure success?
A. Is there adequate rack space for expansion?
B. Which servers are currently being utilized?
C. Is fiber channel or iSCSI being utilized?
D. Which applications are running?
Answer: D
Question #105 Section 1
A customer needs to maximize Hyper-V Live Migration performance. What technology will meet the customer's requirement?
A. virtual extensible LAN(VXLAN)
B. Fibre Channel over Ethernet (FCoE)
C. network virtualization using generic routing encapsulation (NVGRE)
D. RDMA over Converged Ethernet (RoCE)
Answer: D
Question #106 Section 1
Your customer wants to add additional five HPE Synergy frames to an existing environment based on ten frames. The customer wants to know how to add new frames to
existing infrastructure. How should you explain the expansion process?
A. Add required licenses to the HPE Composer, and add them to the existing logical enclosure
B. Add additional HPE Composer to match a 3:1 frame-to ""Composer ratio
C. Discover new frames in HPE Composer, and add them to the existing logical enclosure
D. Add new frames to the existing management ring using Frame Link Modules
Answer: D
Question #107 Section 1
You are introducing Synergy to a new customer. Which tool can you use to demonstrate the physical components of the Synergy frame and how they connect?
A. HPE Product Bulletin
B. HPE Synergy Planning Tool
C. HPE Product Tour
D. HPE PartSurfer
Answer: B
Reference:
https://support.hpe.com/hpsc/doc/public/display?docId=c05061206
(p.33, power supply configurations)
Question #108 Section 1
Which product provides an interface for customers to monitor device health, hardware events, and contract and warranty status?
A. Intelligent Provisioning
B. Insight Online
C. HPE OneView Global Dashboard
D. HPE OneView
Answer: B
Reference:
https://support.hpe.com/hpsc/doc/public/display?docId=c03178991
Question #109 Section 1
A customer operates a High Performance Cluster (HPC) environment and wants to innovate and maximize GPU processing. Which solution should the customer use for
scaling-out?
A. Apollo
B. ProLiant DL servers
C. Synergy
D. ProLiant c-Class
Answer: A
Reference:
https://www.hpe.com/us/en/solutions/hpc-high-performance-computing.html

User: Mariana***** Passing my hpe0-s54 exam was crucial for me to retain my job in my current company, and it was not an easy task without some help. Thanks to the Killexams.com preparation pack, which included hpe0-s54 questions answers and an exam simulator, I learned so much and passed my hpe0-s54 exam with pride. Great work, Killexams.com.

User: Fatema***** I passed my hpe0-s54 exam with the help of killexams.com, and all the questions on the exam were from their material. They were a real helper for me at the hpe0-s54 exam, and I give all praise for my success to this guide. It guided me in the right manner for trying hpe0-s54 exam questions, making me proficient enough to try all of them. This study material guides a person in the right way and ensures 100% success in the exam.

User: Allan***** When I was preparing for my HPE0-S54 exam, I had difficulty finding suitable exam materials. I discovered Killexams.com while searching for quality certification practice tests and was impressed with the variety of resources available on the site. I subscribed and used their study materials to prepare for the exam. With their help, I was able to pass with flying colors, and I am grateful to Killexams.com for their assistance.

User: Mary***** I found the Questions and Answers provided by Killexams.com to be very helpful during my exam. They provided me with the confidence and assurance I needed to pass the HPE0-S54 exam. I am grateful for their assistance and would highly recommend their study materials to anyone looking to pursue further certifications.

User: Sofia***** Thanks to the Killexams.com practice tests, I was able to pass the HPE0-S54 exam with ease. They quickly alleviated any doubts I had about the exam and provided all the necessary materials to succeed. This was the first time in my career that I attended an exam with such confidence and passed with flying colors. I am grateful for the outstanding help provided by Killexams.com.

---