JN0-636 : Security, Professional (JNCIP-SEC) Exam

JN0-636 Dumps
JN0-636 Braindumps
JN0-636 Real Questions
JN0-636 Practice Test
JN0-636 Actual Questions


Juniper
JN0-636
Security, Professional (JNCIP-SEC)
https://killexams.com/pass4sure/exam-detail/JN0-636
Question: 181
SRX Series device enrollment with Policy Enforcer fails To debug further, the user issues the following
commandshow configuration services securityâintelligence url
https://cloudfeeds.argon.juniperaecurity.net/api/manifeat.xml
and receives the following output:
What is the problem in this scenario?
A. The device is directly enrolled with Juniper ATP Cloud.
B. The device is already enrolled with Policy Enforcer.
C. The SRX Series device does not have a valid license.
D. Junos Space does not have matching schema based on the
Answer: C
Question: 182
You are asked to deploy filter-based forwarding on your SRX Series device for incoming traffic sourced from the
10.10 100 0/24 network in this scenario, which three statements are correct? (Choose three.)
A. You must create a forwarding-type routing instance.
B. You must create and apply a firewall filter that matches on the source address 10.10.100.0/24 and then sends this
traffic to your routing
C. You must create and apply a firewall filter that matches on the destination address 10 10.100.0/24 and then sends
this traffic to your routing instance.
D. You must create a RIB group that adds interface routes to your routing instance.
E. You must create a VRF-type routing instance.
Answer: A,B,D
Question: 183
You are asked to provide single sign-on (SSO) to Juniper ATP Cloud.
Which two steps accomplish this goal? (Choose two.)
A. Configure Microsoft Azure as the service provider (SP).
B. Configure Microsoft Azure as the identity provider (IdP).
C. Configure Juniper ATP Cloud as the service provider (SP).
D. Configure Juniper ATP Cloud as the identity provider (IdP).
Answer: B,C
Question: 184
You want to identify potential threats within SSL-encrypted sessions without requiring SSL proxy to decrypt the
session contents.
Which security feature achieves this objective?
A. infected host feeds
B. encrypted traffic insights
C. DNS security
D. Secure Web Proxy
Answer: B
Question: 185
Exhibit


You are using ATP Cloud and notice that there is a host with a high number of ETI and C&C hits sourced from the
same investigation and notice that some of the events have not been automatically mitigated.
Referring to the exhibit, what is a reason for this behavior?
A. The C&C events are false positives.
B. The infected host score is globally set bellow a threat level of 5.
C. The infected host score is globally set above a threat level of 5.
D. The ETI events are false positives.
Answer: D
Question: 186
Exhibit

Which statement is true about the output shown in the exhibit?
A. The SRX Series device is configured with default security forwarding options.
B. The SRX Series device is configured with packet-based IPv6 forwarding options.
C. The SRX Series device is configured with flow-based IPv6 forwarding options.
D. The SRX Series device is configured to disable IPv6 packet forwarding.
Answer: A
Question: 187
Exhibit




You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-1 while
sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including
the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit. The traffic from the
172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network
(172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?
A. You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.
B. You must apply the firewall filter to the lo0 interface when using filter-based forwarding.
C. You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.
D. You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.
Answer: D
Question: 188
Exhibit
You configure a traceoptions file called radius on your returns the output shown in the exhibit
What is the source of the problem?
A. An incorrect password is being used.
B. The authentication order is misconfigured.
C. The RADIUS server IP address is unreachable.
D. The RADIUS server suffered a hardware failure.
Answer: D
Question: 189
Your Source NAT implementation uses an address pool that contains multiple IPv4 addresses Your users report that
when they establish more than one session with an external application, they are prompted to authenticate multiple
times External hosts must not be able to establish sessions with internal network hosts
What will solve this problem?
A. Disable PA
B. Enable destination NA
C. Enable persistent NAT
D. Enable address persistence.
Answer: B
Question: 190
What is the purpose of the Switch Microservice of Policy Enforcer?
A. to isolate infected hosts
B. to enroll SRX Series devices with Juniper ATP Cloud
C. to inspect traffic for malware
D. to synchronize security policies to SRX Series devices
Answer: A
Question: 191
Exhibit



Referring to the exhibit, which statement is true?
A. This custom block list feed will be used before the Juniper Seclntel
B. This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.
C. This custom block list feed will be used instead of the Juniper Seclntel block list feed
D. This custom block list feed will be used after the Juniper Seclntel block list feed.
Answer: D
Question: 192
Exhibit


The exhibit shows a snippet of a security flow trace.
In this scenario, which two statements are correct? (Choose two.)
A. This packet arrived on interface ge-0/0/4.0.
B. Destination NAT occurs.
C. The capture is a packet from the source address 172.20.101.10 destined to 10.0.1.129.
D. An existing session is found in the table.
Answer: A,C,D
Question: 193
Regarding IPsec CoS-based VPNs, what is the number of IPsec SAs associated with a peer based upon?
A. The number of traffic selectors configured for the VP
B. The number of CoS queues configured for the VP
C. The number of classifiers configured for the VP
D. The number of forwarding classes configured for the VP
Answer: A
Question: 194
Exhibit




You are trying to configure an IPsec tunnel between SRX Series devices in the corporate office and branch1. You
have committed the configuration shown in the exhibit, but the IPsec tunnel is not establishing.
In this scenario, what would solve this problem.
A. Add multipoint to the st0.0 interface configuration on the branch1 device.
B. Change the IKE proposal-set to compatible on the branch1 and corporate devices.
C. Change the local identity to inet advpn on the branch1 device.
D. Change the IKE mode to aggressive on the branch1 and corporate devices.
Answer: C
Question: 195
You want to configure a threat prevention policy.
Which three profiles are configurable in this scenario? (Choose three.)
A. device profile
B. SSL proxy profile
C. infected host profile
D. C&C profile
E. malware profile
Answer: A,D,E
Question: 196
You are asked to detect domain generation algorithms
Which two steps will accomplish this goal on an SRX Series firewall? (Choose two.)
A. Define an advanced-anti-malware policy under [edit services].
B. Attach the security-metadata-streaming policy to a security
C. Define a security-metadata-streaming policy under [edit
D. Attach the advanced-anti-malware policy to a security policy.
Answer: A,D
Question: 197
You are deploying a virtualization solution with the security devices in your network Each SRX Series device must
support at least 100 virtualized instances and each virtualized instance must have its own discrete administrative
domain.
In this scenario, which solution would you choose?
A. VRF instances
B. virtual router instances
C. logical systems
D. tenant systems
Answer: C
Question: 198
Exhibit
You configure Source NAT using a pool of addresses that are in the same subnet range as the external ge-0/0/0
interface on your vSRX device. Traffic that is exiting the internal network can reach external destinations, but the
return traffic is being dropped by the service provider router.
Referring to the exhibit, what must be enabled on the vSRX device to solve this problem?
A. STUN
B. Proxy ARP
C. Persistent NAT
D. DNS Doctoring
Answer: D
Question: 199
Exhibit

An administrator wants to configure an SRX Series device to log binary security events for tenant systems.
Referring to the exhibit, which statement would complete the configuration?
A. Configure the tenant as TSYS1 for the pi security profile.
B. Configure the tenant as root for the pi security profile.
C. Configure the tenant as master for the pi security profile.
D. Configure the tenant as local for the pi security profile
Answer: B
Question: 200
Your company wants to use the Juniper Seclntel feeds to block access to known command and control servers, but
they do not want to use Security Director to manage the feeds.
Which two Juniper devices work in this situation? (Choose two)
A. EX Series devices
B. MX Series devices
C. SRX Series devices
D. QFX Series devices
Answer: B,C

User: Ludmilla***** I wanted to express my gratitude to killexams.com for helping me pass my SECURITY, PROFESSIONAL (JNCIP-SEC) exam with a score of 90%. I subscribed to their test materials and found them to be incredibly helpful. Thanks again for your excellent assistance!

User: Julianna***** I highly recommend the killexams.com questions and answers to anyone preparing for IT exams. The exact and valid actual test questions of the jn0-636 exam that appeared on my screen during the real exam amazed me. I had enough practice with the jn0-636 practice tests and exam simulator, and I finished the test within half the time. I got a 99% score, which is great.

User: Liz***** Thanks to the killexams.com questions and answers, I was able to pass the JN0-636 exam with a score of 100%. The material was accurate and up-to-date, which made my preparation more effective.

User: Winnie***** A few days ago, I passed the jn0-636 exam with an ideal score. However, I cannot take full credit for it as I used killexams.com to prepare. Two weeks after starting my practice with their exam simulator, I felt confident in my ability to answer any question that might come my way, and during the exam, I had already seen most of the questions. I found the study guide to be very relevant and beneficial, and I cannot thank killexams.com enough for helping me succeed.

User: Jood***** I recently passed the jn0-636 exam using a guide that proved to be very helpful. The majority of the questions on the exam were covered in this guide, and the answers were accurate. I highly recommend this website for anyone preparing to take the jn0-636 exam.

---