MB-335 : Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert Exam

MB-335 Dumps
MB-335 Braindumps
MB-335 Real Questions
MB-335 Practice Test
MB-335 Actual Questions


Microsoft
MB-335
Microsoft Dynamics 365 Supply Chain Management Functional
Consultant Expert
https://killexams.com/pass4sure/exam-detail/MB-335
Question: 15
You need to set up the configuration model to price the motorcycles correctly.
What should you do?
A. Set Order type in price model to Sales Order and Pricing method in Version to Attribute based
B. Set Order type in price model to Sales Order and Pricing method in Version to Cost based.
C. Set Order type in price model to Sales Quotation and Pricing method in Version to Attribute based.
D. Set Order type in price model to Sales Quotation and Pricing method in Version to Cost based
Answer: A
Question: 16
DRAG DROP
You need to set up the system to calculate the overhead rates automatically for production.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions
to the answer area and arrange them in the correct order.


Answer: A
Question: 17
HOTSPOT
You need to configure scheduling for each production area.
Which scheduling options should you use? To answer, select the appropriate option in the answer area. NOTE: Each
correct selection is worth one point.



Answer: A
Question: 18
HOTSPOT
You need to configure each item for plastic manufacturing.
Which production types should you use? To answer, select the appropriate option in the answer area. NOTE: Each
correct selection is worth one point.



Answer: A
Question: 19
You need to set up the state control for sales of motorcycles.
Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct
selection is worth one point.
A. Create an inclusive restricted product list for United States. Do not add the motorcycle part to the list.
B. Create an inclusive restricted product list for United States and add the motorcycle part to the list.
C. Create an exclusive restricted product list for California and add the motorcycle part to the list.
D. Create an exclusive restricted product list for Missouri and add the motorcycle part to the list.
Answer: A,B,C
Explanation:
Reference: https://stoneridgesoftware.com/working-with-restricted-products-in-dynamics-365-operations/
Question: 20
You need to set up the metal production route and BOM.
Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct
selection is worth one point.
A. Set the operation route type as Standard.
B. Set the input warehouse on the resource to the vendor warehouse.
C. Set the operation route type as Vendor.
D. Set all BOM lines warehouse to the production warehouse.
E. Set all the BOM lines to resource consumption.
Answer: A,B,C,D
Question: 21
You need to configure the system for plastic operations.
Which two parts should be manually reported as finished? Each correct answer presents part of the solution. NOTE:
Each correct selection is worth one point.
A. unmachined plastic pieces
B. mold tooling
C. machined plastic pieces
D. excess plastic
Answer: A,C
Question: 22
Topic 3, Case Study 3 Adventure Works
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to
complete each case. However, there may be additional case studies and sections on this exam. You must manage your
time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case
study. Case studies might contain exhibits and other resources that provide more information about the scenario that is
described in the case study. Each question is independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make
changes before you move to the next section of the exam. After you begin a new section, you cannot return to this
section.
To start the case study
To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the
content of the case study before you answer the questions. Clicking these buttons displays information such as
business requirements, existing environment, and problem statements. If the case study has an All Information tab,
note that the information displayed is identical to the information displayed on the subsequent tabs. When you are
ready to answer a question, click the Question button to return to the question.
Background
Adventure Works Cycles is a high-end bicycle manufacturer in North America. Their standard model bicycles are
available year-round. Limited-edition bicycle models are released several times a year to boutique retailers
domestically.
Adventure Works has had the most success with their limited-edition bicycles. These bicycles have high margins, are
in high demand, and have a strong following with the younger generation biking community.
Current environment
General
Adventure Works expects to triple their manufacturing capabilities in the next few years due to increasing demand. The
company plans to invest in Dynamics 365 Finance, Dynamics 365 Supply Chain Management, and the Power Platform
products to migrate from a custom-built enterprise resource planning (ERP) solution and Microsoft Excel worksheets.
Adventure Works sells only to the United States and Canada. Despite their limited market, they cannot keep up with
current demand. Over time, they want to expand their market to remain profitable.
Adventure Works has no capabilities or budget to undertake any development beyond Excel formula-level tasks.
Bicycle manufacturing
Bicycle models are measured and reported against how well a single model performs as a sum of all the variations of
that model. For example, the Street Kid YOLO model sold 25,000 units in 2019 across all variations of the product, but
the Purple Female frame made up 30 percent of that modelâs sales.
The Street Kid YOLO models sell in different volumes depending on the market.
The creation of production orders for bicycles occurs monthly and is based on historical sales.
Each part of a bicycleâs assembly occurs at a different station in the Adventure Works production facility.
A piece of paper that has eight sections accompanies a bicycle throughout the manufacturing process. As each step is
completed, the respective section is completed and signed off by a production worker.
The completed paper is used in the put-away process by the warehouse workers.
Financials
The standard model and limited-edition bicycle teams are separate operating units within the manufacturing division.
Financials are tracked and reported separately even though they are produced and sold in the same sales channels.
Updates to the standard model bicycle models are created when a part for a bicycle becomes unavailable. This can
change the cost of the product.
An updated model of a bicycle with new parts will be maintained as a new item and have a new price. However, it
will look like the exact same product to retailers and distributors.
Manufacturing process
The bicycle manufacturing process is shown in the following graphic:
Limited-edition bicycle process
The limited-edition bicycles are made up of an Adventure Works custom frame with all other parts created by local
artists and manufacturers.
Each bicycle has a unique set of new items that make up the bill of materials (BOM) because all parts are created to
specification.
A single pilot limited-edition bicycle is created as a proof of concept.
Adventure Works occasionally reuses components from existing bicycles, but most limited-edition bicycles are made
of handcrafted components designed to specifications.
Each limited-edition bicycle is built, and hand signed by a single Adventure Works artisan.
Sales price must be auto calculated after the cost price is derived.
Before creating the proof of concept limited-edition bicycle, the approximate sales price needs to be determined
through a cost-plus 20 percent calculation.
All items except for the frame in the prototype process are considered finished items and can be sold individually.
The frame items require modifications in accordance with the manufacturing process as well as painting.
Each Adventure Works limited-edition bicycle artisan is scheduled to create a specific number of bicycles in a
production run that must be completed by a certain date.
Limited-edition bicycle artisans work exclusively on a given run of limited-edition bicycles and are not able to work
on other tasks.
Limited-edition bicycle BOM assembly process
The prototype process for the limited-edition bicycles is shown in the following graphic:




Requirements
General
Adventure Works will consist of three legal entities: the primary legal entity of the United States (AWUS), sales in
Canada (AWCA), and an international expansion (AWIN).
AWIN must be able to sell only standard model bicycles.
AWUS and AWCA must be able to sell both standard model and limited-edition bicycles.
Warehouse workers must use the Warehouse Management mobile application to manage all inventory inbound and
outbound from the warehouse.
Bicycle manufacturing
The handlebars, back wheels, and front wheels must not change for any of the bicycle model configurations.
Standard model bicycle production scheduling must be configured to start as soon as possible.
Bicycle components must be automatically reserved when the item is released to the production floor.
Standard model bicycle production must be automatically created on a predefined schedule.
As soon as bicycles are completed, they must be available to fulfill the backlog of orders.
Limited-edition bicycle production must be configured to meet the end date for when the bicycles must be completed.
Production orders need to track financials by standard model or limited-edition bicycle manufacturing teams.
The system must log the immediate consumption of BOMs for traceability.
All inventory is warehouse enabled.
Finished goods are reported as finished by the warehouse worker who picks up the finished product from the
packaging area.
Finished products must automatically have put-away work completed for them.
New limited-edition bicycle process
Adventure Works is creating a new, limited-edition bicycle to commemorate the companyâs tenth anniversary. The
limited-edition bicycle will be designed for charity events and be produced for the summer season.
The bicycle must be available in menâs, womenâs, and unisex frame styles. It will be painted in one of 50 hand-
painted designs representing the charity of the customerâs choosing.
A limited run of 100 bicycles must be created.
The limited-edition bicycles must use the same production process as the standard model bicycles.
The limited-edition bicycles must use the same parts used for previous limited-edition bicycles, except for the unique
paint colors.
Frames must be painted in-house.
Five painting options are available only in the unisex frame style.
New limited-edition bicycle orders
Customers must be able to place sales orders for the item in the chosen frame configuration, including style and color.
When an order for the new limited-edition bicycle is created, payment must be provided.
An approval for an order must exist for the order to be processed.
Upon approval of an order, production must start immediately and not require re-entry of data.
DRAG DROP
You need to create the new summer limited edition bicycle in Dynamics 365 in preparation for taking orders.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions
to the answer area and arrange them in the correct order.


Answer: A,C
Explanation:
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/dimension-based-product-configuration
Question: 23
You need to create the production orders for standard model bicycles.
Which method should you use?
A. Sales order line
B. Master planning execution
C. Supply schedule form
D. Released item
E. All production orders form
Answer: C
Explanation:
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/master-planning/supply-schedule
Question: 24
You need to configure the bicyclesâ production resource.
Which option should you use?
A. Exclusive capacity set to yes and enter a Batch capacity.
B. Exclusive capacity set to no and infinite capacity.
C. Exclusive capacity set to yes and infinite capacity.
D. Exclusive capacity set to no and enter a Batch capacity.
Answer: C
Explanation:
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/operations-resources
Question: 25
You need to determine the sales price for a new limited-edition bicycle for the summer season.
What should you do?
A. Run inventory close for the BOM items for the limited-edition bicycle.
B. Create the production order for the limited-edition bicycle and click estimate.
C. Run the category price rules for the limited-edition bicycle using a cost-plus calculation.
D. Run the pricing simulator for the limited-edition bicycle for a quantity of one.
Answer: B

User: Ananya***** At the dinner table the other night, my father asked me if I was going to fail my upcoming MB-335 exam. I responded confidently with a resounding "No way." Thanks to Killexams.com, I was able to keep my word and pass the exam with excellent results. I am thankful for their help and support.

User: Samara***** The microsoft dynamics 365 supply chain management functional consultant expert exam had become challenging for me due to a lack of time for training. However, with the help of Killexams.com study materials and expert certification guide, I was able to get through most of the subjects with little effort and answered all the questions in less than 81 minutes, receiving a 97% mark.

User: Delfina***** I used to be wary of online practice tests due to the misinformation and lack of proper study materials. However, Killexams.com provided truly valid questions and answers that helped me get through my exam. The first time I trusted loose online material, and I failed. But with the Killexams.com MB-335 exam simulator, I passed the exam, and that is the only evidence I need. Thank you, Killexams.com team.

User: Zarya***** Thanks to killexams.com, I passed the MB-335 exam in just weeks with 96% marks. I am very confident now that I can do better in my remaining three exams and certainly use your practice material and recommend it to my friends. The online practice engine product is extremely good, and I highly recommend it to all students.

User: Allan***** I am thrilled to have passed my mb-335 exam with a nearly perfect score of 98% thanks to Killexams! The material in the package is accurate and valid, just like the questions on my actual exam. I was able to answer most of the questions easily, and some of the extra questions were very similar to the ones covered in the test guide, so I had no trouble answering them. This not only helped me expand my professional knowledge, but it also gave me a smooth path to my mb-335 certification.

---