NS0-184 : NetApp Certified Storage Installation Engineer, ONTAP Exam

Network-Appliance
NS0-184
NetApp Certified Storage Installation Engineer, ONTAP
https://killexams.com/pass4sure/exam-detail/NS0-184
Question: 67
When you start a new Service Event Report, what must be entered first?
A. the case ID number
B. the project number
C. the node serial number
D. the sales order number
Answer: B
Question: 68
On which type of network interfaces are the cluster interconnect LIFs created?
A. on an FC or FCoE port
B. on an interface group
C. on a UTA port shared with other LIFs
D. on a physical port
Answer: B
Question: 69
Your customer plans to expand a 2-node FAS2750 switched cluster with two new controllers.
In this scenario, which two prerequisites should you examine in advance? (Choose two.)
A. Verify that the hard drives of the new controllers are compatible with the old controllers.
B. Verify that the existing cluster has a minimum 10 GB of free space for root volumes.
C. Verify that the existing switches support the additional controllers.
D. Verify that the platform of the new controllers can be mixed with the cluster’s existing controllers.
Answer: B,D
Explanation:
Reference: https://docs.netapp.com/us-en/ontap-sm-classic/expansion/task_verifying_planned_configuration.html
Question: 70
You want to add an AFF A400 HA pair to an existing cluster.
In this scenario, which LIF type is required?
A. cluster-mgmt
B. intercluster
C. data
D. node-mgmt
Answer: B
Explanation:
Reference: https://docs.netapp.com/us-en/ontap-metrocluster/pdfs/sidebar/Add_a_new_controller_module_to_each_cluster.pdf
Question: 71
You want to enable secure communication with the SP or BMC through CA-signed certificates.
Which two certificate types must be installed in this scenario? (Choose two.)
A. cluster certificate
B. server certificate
C. root CA certificate
D. ONTAP certificate
Answer: B,C
Explanation:
Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/How_to_configure_communication_between_ONTAP_and_Service_Processor_(SP)_or_BMC_with_Certificate_Authority_(CA)_signed_certificates
Question: 72
After the installation of a new ONTAP 9.8 cluster, you have to verify if AutoSupport works.
In this scenario, which two commands would you use to accomplish this task? (Choose two.)
A. system node autosupport history show
B. system node autosupport check show
C. system node autosupport destination show
D. system node autosupport invoke
Answer: A,B
Explanation:
Reference: http://docs.netapp.com/us-en/ontap/pdfs/sidebar/Troubleshoot_AutoSupport.pdf
Question: 73
An administrator issued the cluster setup command and configured a 2-node ONTAP 9.8 cluster.
In this scenario, which tool would the administrator use to validate the configuration?
A. Active IQ Upgrade Advisor
B. Interoperability Matrix Tool
C. NetAppDocs
D. Active IQ Config Advisor
Answer: C
Explanation:
Reference: https://github.com/NetAppDocs/ontap-metrocluster/blob/main/install-stretch/concept_configuring_the_mcc_software_in_ontap.adoc
Question: 74
What is the minimum number of disks required in a SAS shelf?
A. half of the shelf’s capacity
B. one
C. two
D. there is no minimum
Answer: D
Question: 75
You have completed a base installation and system registration of an AFF A250 system, but you notice that you have one failed drive. Neither “un-failing” nor reseating the drive helped to repair it. You must ensure proper replacement
of the failed drive.
In this scenario, which two actions should you take? (Choose two.)
A. Ask the customer to open a technical case with NetApp Support.
B. Ask the customer for a drive with the same capacity and replace it.
C. Run Active IQ Config Advisor to collect all the logs on the system.
D. Power off the system until the drive has been replaced.
Answer: B,C
Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/a250/install-detailed-guide.html#step-1-prepare-for-installation
Question: 76
You are adding new controllers to an existing cluster. As part of the upgrade process, you have updated the BES-53248 cluster switches. In this scenario.
Which two commands would you use to verify a healthy cluster after the upgrade? (Choose two.)
A. network port show -ipspace Cluster
B. network interface show -vserver Cluster
C. network device-discovery show -protocol cdp
D. network interface show -vserver Cluster -fields auto-revert
Answer: AB
Question: 77
Which logical interface has a fixed firewall policy?
A. data LIF
B. cluster management LIF
C. cluster LIF
D. intercluster LIF
Answer: C
Explanation:
Reference: https://docs.netapp.com/us-en/ontap/networking/configure_firewall_policies_for_lifs.html#create-a-firewall-policy-and-assigning-it-to-a-lif
Question: 78
You installed two separate clusters in an isolated data center without outbound network access. The customer wants to troubleshoot issues locally and also create custom Excel reports for capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?
A. Active IQ Digital Advisor
B. Active IQ Unified Manager
C. Cloud Insights
D. ONTAP System Manager
Answer: B
Explanation:
Reference: https://www.netapp.com/media/17229-tr4015.pdf
Question: 79
A host cannot connect to the namespace configured on an NVMe-enabled SVM.
In this scenario, what are two reasons for this problem? (Choose two.)
A. The namespace has not been added to the subsystem
B. The namespace has not be added to the igroup
C. The igroup has an incorrect NQ
E. The subsystem has an incorrect NQN
Answer: AD
Question: 80
Click the Exhibit button.
Referring to the numbers shown in the exhibit, which port on an AFF A220 controller is used as port e0M in ONTAP?
A. 4
B. 3
C. 2
D. 1
Answer: A
Explanation:
Reference:
https://documents.uow.edu.au/~blane/netapp/ontap/sysadmin/accessing/concept/c_oc_accs_access-methods-e0m.html
For More exams visit https://killexams.com/vendors-exam-list

User: Liliya***** Thanks to Killexams.com, I saved time and money, and without their Questions and Answers, I would have failed the NS0-184 exam. I was confused about some questions, so I had to guess, but I should have studied and focused on the questions more carefully. Nonetheless, I am happy to have passed the exam.

User: Andrew***** I am grateful to killexams.com for their mock test on ns0-184, which helped me pass the exam without any issues. I have also taken a mock test from them for my other exam, and I find it very beneficial. The questions and answers provided by killexams.com are very helpful, and their explanations are incredible. I would give them five stars for their excellent service.

User: Ben***** The benefits of using killexams.com for my netapp certified storage installation engineer, ontap exam were tremendous. The exam simulator was especially helpful, and I am glad that I was well-prepared for the questions provided. I highly recommend using killexams.com to anyone who wants to pass their netapp certified storage installation engineer, ontap exam with ease. I was able to achieve a perfect score, which I never expected.

User: Adam***** After using the ns0-184 practice test by killexams.com, I feel confident to attempt the exam. In the past, I was always fearful when preparing for the tests, but now I feel amazed at my self-belief. The reason is the excellent ns0-184 preparation by killexams.com. I am now fully prepared and confident that I can pass my exams easily. Therefore, if anyone feels low self-assurance, get registered with killexams.com and start studying; eventually, you will feel self-assured.

User: Sveta***** I am thankful for the ns0-184 practice tests provided by killexams.com, as they contained all the simulations and maximum questions that I was asked in the actual exam. I scored 97% on the test, which exceeded my expectations. After trying several books, I was disappointed with the material, but killexams.com Questions and Answers satisfied my needs, as it explained complicated topics in the best way possible.

---