PAS-C01 : SAP on AWS - Specialty Certification Exam

PAS-C01 Dumps
PAS-C01 Braindumps
PAS-C01 Real Questions
PAS-C01 Practice Test
PAS-C01 Actual Questions


Amazon
PAS-C01
SAP on AWS - Specialty Certification
https://killexams.com/pass4sure/exam-detail/PAS-C01
Question: 85
An SAP technology consultant needs to scale up a primary application server (PAS) instance The PAS currently runs
on a c5a.xlarge Amazon EC2 instance The SAP technology consultant needs to change the instance type to c5a
2xlarge
How can the SAP technology consultant meet this requirement?
A. Stop the complete SAP system Stop the EC2 instance Use the AWS Management Console or the AWS CLI to
change the instance type Start the EC2 instance Start the complete SAP system
B. While SAP is running use the AWS Management Console or the AWS CLI to change the instance type without
stopping the EC2 instance
C. Stop the complete SAP system Terminate the EC2 instance Use the AWS Management Console or the AWS CLI to
change the instance type Start the EC2 instance Start the complete SAP system
D.
Answer: B
Question: 86
A company wants 10 implement SAP HANAonAWS with the Multi-AZ deployment option by using AWS Launch
Wizard for SAP The solution will use SUSE Linux Enterprise High Availability Extension for the high availability
deployment An SAP solutions architect must ensure that all the prerequisites are met The SAP solutions architect also
must ensure that the user inputs to start the guided deployment of Launch Wizard are valid.
Which combination of steps should the SAP solutions architect take to meet these requirements? (Select TWO)
A. Before starting the Launch Wizard deployment create the underlying Amazon Elastic Block Store (Amazon EBS)
volume types to use for SAP HANA data and log volumes based on the performance requirements
B. Use a value for the PaceMakerTag parameter that is not used by any other Amazon EC2 instances in the AWS
Region where the system is being deployed
C. Ensure that the virtual hostname for the SAP HANA database that is used for the SUSE Linux Enterprise High
Availability Extension configuration is not used in any other deployed accounts
D. Ensure that the Virtual Address parameter is outside the VPC CIDR and is not being used in the route table that is
associated with the subnets where primary and secondary SAP HANA instances will be deployed
E. Before starting the Launch Wizard deployment set up the SUSE Linux Enterprise High Availability Extension
network configuration and security group
Answer: A,B,E
Question: 87
A company wants to migrate its SAP landscape from on premises to AWS
What are the MINIMUM requirements that the company must meet to ensure full support of SAP on AWS? (Select
THREE.)
A. Enable detailed monitoring for Amazon CloudWatch on each instance in the landscape
B. Deploy the infrastructure by using SAP Cloud Appliance Library
C. Install configure and run the AWS Data Provider for SAP on each instance m the landscape
D. Protect all production instances by using Amazon EC2 automatic recovery
E. Deploy the infrastructure for the SAP landscape by using AWS Launch Wizard for SAP
F. Deploy the SAP landscape on an AWS account that has either an AWS Business Support plan or an AWS
Enterprise Support plan
Answer: A,B,C,F
Question: 88
A company is planning to move its on-premises SAP HANA database to AWS. The company needs to migrate this
environment to AWS as quickly as possible An SAP solutions architect will use AWS Launch Wizard for SAP to
deploy this SAP HANA workload.
Which combination of steps should the SAP solutions architect follow to start the deployment of this workload on
AWS? (Select THREE.)
A. Download the SAP HANA software
B. Download the AWS CloudFormation template for the SAP HANA deployment
C. Download and extract the SAP HANA software upload the SAP HANA software to an FTP server that Launch
Wizard can access
D. Upload the unextracted SAP HANA software to an Amazon S3 destination bucket Follow the S3 file path syntax
for the software in accordance with Launch Wizard recommendations
E. Bring the operating system AMI by using the Bring. Your Own Image (BYOI) model or
purchase the subscription for the operating system AMI from AWS Marketplace
F. Create the SAP file system by using Amazon Elastic Block Store (Amazon EBS) before the deployment
Answer: A,C,F
Question: 89
A company wants to migrate its SAP workloads to AWS from another cloud provider. The company's landscape
consists of SAP S 4HANA SAP BWMHANA SAP Solution Manager and SAP Web Dispatcher SAP Solution
Manager 15 running on SAP NANA
The company wants 10 change the operating system from SUSE Linux Enterprise Server to Red Hat Enterprise Linux
as a pan of this migration. The company needs a solution that results in the least possible downtime for the SAP
SMHANA and SAP BW 4HANA systems.
Which migration solution will meet these requirements?
A. Use SAP Software Provisioning Manager to perform a system export/import for SAP S/4HANA SAP B
B. 4HANA SAP Solution Manager and SAP Web Dispatcher
C. Use backup and restore tor SAP S'4HAN
D. SAP BW4HANA and SAP Solution Manager Reinstall SAP Web Dispatcher on AWS with the necessary
configuration
E. Use backup and restore for SAP Sâ4 HAN A and SAP BW 4HANA Use SAP Software Provisioning Manager to
perform a system export import for SAP Solution Manager Reinstall SAP Web Dispatcher on AWS with the necessary
configuration.
F. Use SAP HANA system replication to replicate the data between the source system and the target AWS system for
SAP S 4HANA and SAP BW 4HANA Use SAP Software Provisioning Manager to perform a system export import
for SAP Solution Manager Reinstall SAP Web Dispatcher on AWS with the necessary configuration
Answer: D
Question: 90
A company is designing a disaster recovery (DR) strategy for an SAP HANA database that runs on an Amazon EC2
instance in a single Availability Zone The company can tolerate a long RTO and an RPO greater than zero if it means
that the company can save money on its DR process.
The company has configured an Amazon CloudWatch alarm to automatically recover the EC2 instance if the instance
experiences an unexpected issue. The company has set up AWS Backint Agent for SAP HANA to save the backups
into Amazon S3.
What is the MOST cost-effective DR option for the company's SAP HANA database?
A. Set up AWS CloudFormation to automatically launch a new EC2 instance for the SAP HANA database in a second
Availability Zone from backups that are stored in Amazon S3 When the SAP HANA database is operational perform a
database restore by using the standard SAP HANA restore process.
B. Launch a secondary EC2 instance for the SAP HANA database on a less powerful EC2 instance type in a second
Availability Zone Configure SAP HANA system replication with the preload option turned off
C. Launch a secondary EC2 instance tor the SAP HANA database on an equivalent EC2 instance type in a second
Availability Zone Configure SAP HANA system replication with the preload option turned on
D. Set up AWS CloudFormation to automatically launch a new EC2 instance for the SAP HANA database in a second
Availability Zone from backups that are stored in Amazon Elastic Block Store (Amazon EBS) When the SAP HANA
database is operational perform a database restore by using the standard SAP HANA restore process
Answer: A
Question: 91
A company's basis administrator is planning to deploy SAP on AWS m Linux. The basis administrator must set up the
proper storage to store SAP HANAdata and log volumes.
Which storage options should the basis administrator choose to meet these requirements? (Select TWO.)
A. Amazon Elastic Block Store (Amazon EBS) Throughput Optimized HDD (st1)
B. Amazon Elastic Block Store (Amazon EBS) Provisioned IOPS SSD (io1, k>2)
C. Amazon S3
D. Amazon Elastic File System (Amazon EFS>
E. Amazon Elastic Block Store (Amazon EBS) General Purpose SSD (gp2 gp3)
Answer: A,C,D
Question: 92
A company needs to migrate its critical SAP workloads from an on-premises data center to AWS The company has a
few source production databases that are 10 TB or more in size The company wants to minimize the downtime for this
migration
As part of the proof of concept the company used a low-speed high-latency connection between its data center and
AWS During the actual migration the company wants to maintain a consistent connection that delivers high bandwidth
and low latency. The company also wants to add a layer of connectivity resiliency. The backup connectivity does not
need to be as fast as the primary connectivity
An SAP solutions architect needs to determine the optimal network configuration for data transfer. The solution must
transfer the data with minimum latency
Which configuration will meet these requirements?
A. Set up one AWS Direct Connect connection for connectivity between the on-premises data center and AWS Add an
AWS Site-to-Site VPN connection as a backup to the Direct Connect connection
B. Set up an AWS Direct Connect gateway with multiple Direct Connect connections that use a link aggregation group
(LAG) between the on-premises data center and AWS
C. Set up Amazon Elastic fie System (Amazon EPS) file system storage between the on-premises data center and
AWS Configure a cron job to copy the data into this EFS mount Access the data in the EFS file system from the target
environment
D. Set up two redundant AWS Site-to-Site VPN connections for connectivity between the on-premises data center and
AWS
Answer: A
Question: 93
A company has an SAP environment that runs on AWS. The company wants to enhance security by restricting
Amazon EC2 Instance Metadata Service (IMDS) to IMDSv2 only. The company's current configuration option
supports both iMDSvi and iM0Sv2. The security enhancement must not create an SAP outage.
What should the company do before it applies the security enhancement on EC2 instances that are running the SAP
environment?
A. Ensure that the SAP kernel versions are 7 45 or later
B. Ensure that the EC2 instances are Nitro based
C. Ensure that the AWS Data Provider for SAP is installed on each EC2 instance
D. Stop the EC2 instances
Answer: A
Question: 94
A company that has SAP workloads on premises plans to migrate an SAP environment to AWS. The company is new
to AWS and has no poor setup.
The company has the following requirements
- The application server and database server must be placed in isolated network configurations
⢠SAP systems must be accessible to the on-premises end users over the internet
⢠The cost of communications between the application server and the database server must be minimized
Which combination of steps should an SAP solutions architect take to meet these requirements? (Select TWO.)
A. Configure a Network Load Balancer for incoming connections from end users
B. Set up an AWS Site-to-Site VPN connection between the company's on-premises network and AWS
C. Separate the application server and the database server by using different VPCs
D. Separate the application server and the database server by using different subnets and network security groups
within the same VPC
E. Set up an AWS Direct Connect connection with a private VIF between the company's on-premises network and
AWS
Answer: A,C,D
Question: 95
A company hosts multiple SAP applications on Amazon EC2 instances in a VPC While monitoring the environment
the company notices that multiple port scans are attempting to connect to SAP portals inside the VPC. These port
scans are originating from the same IP address block. The company must deny access to the VPC from all the
offending IP addresses for the next 24 hours.
Which solution win meet this requirement?
A. Modify network ACLs that are associated with all public subnets in the VPC to deny access from the IP address
block
B. Add a rule in the security group of the EC2 instances to deny access from the IP address block
C. Create a policy in AWS identity and Access Management (1AM) to deny access from the IP address block
D. Configure the firewall m the operating system of the EC2 instances to deny access from the IP address block
Answer: C
Question: 96
A company is running an SAP ERP Central Component (SAP ECC) system on an SAP HANA database that is 10 TB
m size The company rs receiving notifications about long-running database backups every day The company uses
AWS Backint Agent for SAP HANA (AWS Backint agent) on an Amazon EC2 instance to back up the database An
SAP NetWeaver administrator needs to troubleshoot the problem and propose a solution
Which solution will help resolve this problem'?
A. Ensure mat AWS Backint agent is configured to send the backups to an Amazon S3 bucket over the internet Ensure
that the EC2 instance is configured to access the internet through a NAT gateway
B. Check the UploadChanneiSize parameter for AWS Backint agent increase this value in the aws-backint-agent-
config yaml configuration file based on the EC2 instance type and storage configurations
C. Check the MaximumConcurrentFilesForRestore parameter tor AWS Backint agent Increase the parameter from 5 to
10 by using the aws-backint-agent-config yaml configuration file
D. Ensure that the backups are compressed if necessary configure AWS Backint agent to compress the backups and
send them to an Amazon S3 bucket
Answer: A
Question: 97
A company is planning to migrate its on-premises SAP applications to AWS. The applications are based on Windows
operating systems A file share stores the transport directories and third party application data on the network attached
storage of the company's on-premises data center. The company's plan is to lift and shift the SAP applications and the
file share to AWS. The company must follow AWS best practices for the migration
Which AWS service should the company use to host the transport directories and third-party application data on
AWS?
A. Amazon Elastic Block Store (Amazon EBS)
B. AWS Storage Gateway
C. Amazon Elastic File System (Amazon EFS)
D. Amazon FSx for Windows File Server
Answer: C
Question: 98
A company is running its SAP workloads on premises and needs to migrate the workloads to AWS All the workloads
are running on SUSE Linux Enterprise Server and Oracle Database. The company's landscape consists of SAP ERP
Central Component {SAP ECC). SAP Business Warehouse (SAP BW), and SAP NetWeaver systems. The company
has a dedicated AWS Direct Connect connection between its on-premises environment and AWS The company needs
to migrate the systems to AWS with the least possible downtime
Which migration solution will meet these requirements?
A. Use SAP Software Provisioning Manager to perform an export of the systems Copy the export to Amazon S3 Use
SAP Software Provisioning Manager to perform an import of the systems to SUSE Linux Enterprise Server and Oracle
Database on AWS
B. Use SAP Software Provisioning Manager to perform parallel export import of the systems to migrate the systems to
SUSE Linux Enterprise Server and Oracle Database on AWS
C. Use SAP Software Provisioning Manager to perform parallel export/import of the systems to migrate the systems to
Oracle Enterprise Linux and Oracle Database on AWS
D. Use SAP Software Provisioning Manager to perform an export of the systems Copy the export to Amazon S3 Use
SAP Software Provisioning Manager to perform an import of the systems to Oracle Enterprise Linux and Oracle
Database on AW
Answer: B
Question: 99
An SAP basis architect is configuring high availability for a critical SAP system on AWS. The SAP basis architect is
using an overlay IP address to route traffic to the subnets across multiple Availability Zones within an AWS Region
for the system's SAP HANA database.
What should the SAP basis architect do to route the traffic to the Amazon EC2 instance of the active SAP HANA
database?
A. Edit the route in the route table of the VPC that includes the EC2 instance that runs SAP HANA Specify the
overlay IP address as the destination Specify the private IP address of the EC2 instance as the target
B. Edit the inbound and outbound rules in the security group of the EC2 instance that runs
SAP HANA Allow traffic for SAP HANA specific ports from the overlay IP address
C. Edit the network ACL of the subnet that includes the EC2 instance that runs SAP HANA Allow traffic for SAP
HANA specific ports from the overlay IP address
D. Edit the route in the route table of the VPC that includes the EC2 instance that runs SAP HANA Specify the
overlay IP address as the destination Specify the elastic network interface of the EC2 instance as the target
Answer: D
Question: 100
A company has moved an of its SAP workloads to AWS During peak business hours end users are reporting
performance issues because work processes are going into PRIV mode on an SAP S/4HANA system An SAP support
engineer indicates that SAP cannot provide support for this issue because some specific performance metrics are not
available.
Which combination of actions must the company perform to comply with SAP support requirements? (Select THREE.)
A. Buy an SAP license from AWS Ensure that the SAP license is installed
B. Select only an AWS Migration Acceleration Program (MAP) certified managed service provider (MSP)
C. Enable detailed monitoring for Amazon CloudWatch on each Amazon EC2 instance where SAP workloads are
running
D. Install configure and run the AWS Data Provider for SAP on each Amazon EC2 instance where SAP workloads are
running
E. integrate AWS Systems Manager with SAP Solution Manager to provide alerts about SAP parameter configuration
drift
F. Enable SAP enhanced monitoring through a SAPOSCOL enhanced function
Answer: A,B,C
Question: 101
A company is starting a new project to implement an SAP landscape with multiple accounts that belong to multiple
teams in the us-east-2 Region. These teams include procurement finance sales and human resources An SAP solutions
architect has started designing this new landscape and the AWS account structures
The company wants to use automation as much as possible The company also wants to secure the environment
implement federated access to accounts centralize logging and establish cross-account security audits in addition the
company's management team needs
to receive a top-level summary of policies that are applied to the AWS accounts.
What should the SAP solutions architect do to meet these requirements?
A. Use AWS CloudFormation StackSets to apply SCPs to multiple accounts in multiple Regions. Use an Amazon
CloudWatch dashboard to check the applied policies in the accounts
B. Use an AWS Elastic Beanstalk blue green deployment to create 1AM policies and apply them to multiple accounts
together Use an Amazon CloudWatch dashboard to check the applied policies in the accounts
C. Implement guardrails by using AWS CodeDeploy and AWS CodePipeline to deploy SCPs into each account Use
the CodePipeline deployment dashboard to check the applied policies in the accounts
D. Apply SCPs through AWS Control Tower Use the AWS Control Tower integrated dashboard to check the applied
policies in the accounts
Answer: D
Question: 102
A global retail company is running its SAP landscape on AWS Recently the company made changes to its SAP Web
Dispatcher architecture The company added an additional SAP Web Dispatcher for high availability with an
Application Load Balancer (ALB) to balance the load between the two SAP Web Dispatchers
When users try to access SAP through the ALB the system is reachable However the SAP backend system is showing
an error message An investigation reveals that the issue is related to SAP session handling and distribution of requests
. The company confirmed that the system was working as expected with one SAP Web Dispatcher. The company
replicated the configuration of that SAP Web Dispatcher to the new SAP Web Dispatcher
How can the company resolve the error?
A. Maintain persistence by using session cookies Enable session stickiness (session affinity) on the SAP Web
Dispatchers by setting the wdisp/HTTP/esid_support parameter to True
B. Maintain persistence by using session cookies Enable session stickiness (session affinity) on the ALB
C. Turn on host-based routing on the ALB to route traffic between the SAP Web Dispatchers
D. Turn on URL-based routing on the ALB to route traffic to the application based on URL
Answer: C
Question: 103
A data analysis company has two SAP landscapes that consist of sandbox development QA, pre-production and
production servers. One landscape is on Windows and the other landscape is on Red Hat Enterprise Linux. The servers
reside in a room m a building that other tenants share.
An SAP solutions architect proposes to migrate the SAP applications to AWS The SAP solutions architect wants to
move the production backups to AWS and wants to make the backups highly available to restore >n case of
unavailability of an on-premises server.
Which solution will meet these requirements MOST cost-effectively?
A. Take a backup of the production servers Implement an AWS Storage Gateway Volume Gateway Create file shares
by using the Storage Gateway Volume Gateway Copy the backup files to the file shares through NFS and 9M
B. Take a backup of the production servers Send those backups to tape drives implement an AWS Storage Gateway
Tape Gateway Send the backups to Amazon S3 Standard-Infrequent Access (S3 Standard-IA) through the S3 console
Move the backups immediately to S3 Glacier Deep Archive
C. Implement a third-party tool to take images of the SAP application servers and database server Take regular
snapshots at 1-hour intervals send the snapshots to Amazon S3 Glacier directly through the S3 Glacier console Store
the same images in different S3 buckets in different AWS Regions
D. Take a backup of the production servers Implement an Amazon S3 File Gateway Create file shares by using the S3
File Gateway Copy the backup files lo the file shares through NFS and SMB Map backup files directly to Amazon S3
Configure an S3 Lifecycle policy to send the backup files to S3 Glacier based on the company's data retention policy
Answer: B
Question: 104
A company runs its SAP ERP 6 0 EHP 8 system on SAP HANAon AWS The system is deployed on an r4 I6xlarge
Amazon EC2 instance with default tenancy. The company needs to migrate the SAP HANA database to an
x2gd/.6xiarge High Memory instance After an operations engineer changes the instance type and starts the instance the
AWS Management Console shows a failed instance status check
What is the cause of this problem?
A. The operations engineer missed the network configuration step during the post-migration activities
B. The operations engineer missed the Amazon CloudWatch configuration step during the
post-migration activities.
C. The operations engineer did not install Elastic Network Adapter (ENA) drivers before changing the instance type
D. The operations engineer did not create a new AMI from the original instance and did not launch a new instance
with dedicated tenancy from the AMI
Answer: D

User: Roksana***** My roommate and I have lived together for a long time, and we often disagree and argue about various matters. However, if there is one thing we both agree on, Its that killexams.com is the best platform to use if you want to pass your PAS-C01 exam. We both used it and were very satisfied with the results we got. I was able to perform well in my PAS-C01 exam, and my marks were excellent. Thank you for the guidance.

User: Novaya***** With only a week remaining until my PAS-C01 exam, I was not confident that I would pass. However, I decided to switch to killexams.com Questions and Answers for my exam preparation. To my surprise, the subjects I had previously found challenging were now more enjoyable to study, thanks to the smooth and concise way of getting to the important factors. Thanks to killexams.com Questions and Answers, I never thought that I would pass my exam, but I did, and I did so with flying colors.

User: Milaya***** Initially, I had a poor view of the PAS-C01 exam preparation guide because I preferred practicing with an exam technique in a classroom. However, I joined two different courses, but they turned out to be a waste of time. Eventually, I came across PAS-C01 exam samples and started using Killexams to prepare. Using Killexams, I obtained the best scores in the exam, and I am happy about it.

User: Elijah***** I am pleased to inform you that I have passed the PAS-C01 exam with the help of Killexams. All the questions on the exam were from their resources, and I can confidently say that it was a significant factor in my success. The guide provided by Killexams was the real helper that guided me in the right direction for attempting the PAS-C01 exam questions. It made me proficient enough to attempt all the questions on the exam desk. This test preparation material is an excellent publication that leads you in the right way and guarantees you 100% success in the exam.

User: Natesha***** I had a great experience preparing for my PAS-C01 exam with Killexams.com. With very little material available online, I was happy to find their high-quality questions and answers. Thanks to Killexams, the exam was very easy, and I managed to pass with flying colors.

---