Latest HH0-210 Practice Tests with Actual Questions

Get Complete pool of questions with Premium PDF and Test Engine

Exam Code : HH0-210
Exam Name : HDS Certified Implementer - Enterprise
Vendor Name :
"Hitachi"

Download Full Version of HH0-210

---

HH0-210 Dumps HH0-210 Braindumps

HH0-210 Real Questions HH0-210 Practice Test HH0-210 Actual Questions

killexams.com

Hitachi

HH0-210

HDS Certified Implementer - Enterprise

https://killexams.com/pass4sure/exam-detail/HH0-210

Question: 108

Which two statements describe the purpose of an action code (ACC) on the VSP? (Choose two.)

1. It provides a link to the Work ID.

2. It contains the SIM message.

3. It contains the part location.

4. It provides detailed error information.

Answer: A, C

Question: 109

You have just installed Hitachi Dynamic Link Manager (HDLM) on a Sun Solaris server. What is the purpose of running the "dlnkmgr view -sys" command?

1. It displays the configuration.

2. It displays the primary path.

3. It displays the alternate path.

4. It configures the alternate path.

Answer: A

Question: 110

A VSP customer is attaching new SUSE Linux servers to their SAN. What are two configuration requirements? (Choose two.)

1. The queue depth per VSP LUN must not exceed 32.

2. The queue depth per VSP LUN must be at least 8.

3. The queue depth per VSP port must not exceed 2048.

4. The queue depth per VSP port must not exceed 1024.

Answer: A, C

Question: 111

Which two products can be used to monitor the Hitachi Dynamic Provisioning (HDP) Pool capacity on a VSP? (Choose two.)

1. Device Manager

2. Storage Navigator

3. Provisioning Manager

Answer: A, B

Question: 112

A customer is using an AMS 2300 system as external storage behind a VSP. They are reworking the power distribution and need to power down both storage systems. What is the correct sequence of actions?

1. Stop the host I/O > power off the VSP > power off the AMS 2300.

2. Stop the host I/O > power off the AMS 2300 > power off the VSP.

3. Perform a path disconnect to the AMS 2300 > stop the host I/O > power off the AMS 2300 > power off the VSP.

4. Stop the host I/O > perform a path disconnect to the AMS 2300 > allow the storage systems to go to battery backup mode when the power is disconnected.

Answer: A

Question: 113

What are two valid locations for the Dynamic Mapping table of Dynamic Provisioning? (Choose two.)

1. in flash memory

2. in one of the pool volumes

3. in cache memory

4. in shared memory

Answer: B, D

Question: 114

Which three steps should be performed during a new VSP installation? (Choose three.)

1. Install HiTrack Monitor on a customer server and configure it.

2. Set the battery date for each battery.

3. Install all SSVP jumpers.

4. Connect the CE laptop to the Console LAN connection port on the SVP.

5. Dump the final configuration and upload it to TUF.

Question: 115

You are installing a VSP with 2 DKCs. Which component makes up the interconnection for data paths?

1. SVP

2. DKA

3. VSD

4. ESW

Answer: D

Question: 116

You have replaced a part on a VSP. What are three mandatory steps to complete your maintenance task? (Choose three.)

1. Complete the "Last maintenance" form inside the DKC door.

2. Complete the corresponding SIM(s).

3. Reboot the SVP to renew the configuration.

4. Check the maintenance screen for any blinking parts.

5. Set the SVP application back to View Mode.

Answer: B, D, E

Question: 117

The SVP has failed on a VSP and you have ordered a replacement. Which functionality is still available while waiting for the new SVP to arrive on site?

1. Configuration changes can be made using raidcom commands.

2. Hitrack can continue monitoring the VSP and report errors.

3. Configuration changes can be made using HiCommand CLI.

4. ShadowImage pairs can be managed with RAID Manager/CCI.

Answer: D

Question: 118

Why will a server in an environment using persistent binding maintain a constant view of its target IDs when rebooted?

1. Because persistent binding retains the target ID information.

2. Because the storage LUN Management Service will manage the target IDs.

3. Because the driver software remaps the SCSI target IDs to the new WWNNs automatically.

4. Because persistent binding will connect to the LUN Manager and provide the target IDs.

Answer: A

Question: 119

Which two operations are supported by the Tiered Storage Manager GUI? (Choose two.)

1. initiate an automatic migration based on performance bottlenecks

2. migrate an external volume to a pool

3. migrate a TrueCopy P-Vol in status PAIR

4. migrate a Journal Volume of Universal Replicator

Answer: B, C

Question: 120

What is the benefit of installing an additional pair of disk adapters (DKA) on a VSP?

1. It increases the total number of disk drives that can be installed.

2. It allows intermix of 2,5" and 3,5" disk drives.

3. It increases throughput on the existing SAS links.

4. It increases the number of SAS links.

Answer: D

User: Luciano***** As an IT professional, the HH0-210 exam was crucial for me, but I struggled to prepare due to time constraints. However, with Killexams.com easy-to-memorize answers, I was able to efficiently prepare for the exam, and the results were surprising. The study guide was like a reference manual, and I was able to complete all the questions before the deadline.

User: Harold***** I managed to secure a 90% score in the HH0-210 exam, thanks to the excellent resources provided by Killexams.com. Their questions and answers were relevant, and the information provided was accurate. I am incredibly pleased with the service provided by Killexams.com and would highly recommend it to anyone preparing for the HH0-210 certification test.

User: Ella***** I highly recommend Killexams.com for those who plan to take the hh0-210 exam. This exam training is notable as it provides the right questions and simulates the exam experience accurately. There is no useless information or irrelevant questions, making it better than any book or PDF I could find. It helped me and my friends pass the exam with ease.

User: Elsie***** Thanks to killexams.com, I was well-prepared for my HDS CERTIFIED IMPLEMENTER - ENTERPRISE exam. Their valid and reliable HDS CERTIFIED IMPLEMENTER - ENTERPRISE practice tests gave me the confidence I needed to perform well on the exam. I was also able to test myself before the exam, which helped me feel more confident about my abilities. I scored well on the exam and am grateful to killexams.com for their support.

User: Jackson***** I will definitely recommend Killexams.com to my peers. I obtained 89% of the scores, and I was delighted with the results I received with the help of the test guide hh0-210 exam brain practice test. I always thought that actual and thorough memorization was the key to passing all exams until I took the assistance of Killexams.com brain practice test to pass my hh0-210 exam. I passed fantastically.

---