HH0-210 : HDS Certified Implementer - Enterprise Exam

HH0-210 Dumps
HH0-210 Braindumps
HH0-210 Real Questions
HH0-210 Practice Test
HH0-210 Actual Questions


Hitachi
HH0-210
HDS Certified Implementer - Enterprise
https://killexams.com/pass4sure/exam-detail/HH0-210
QUESTION: 108
Which two statements describe the purpose of an action code (ACC) on the VSP?
(Choose two.)
A. It provides a link to the Work ID.
B. It contains the SIM message.
C. It contains the part location.
D. It provides detailed error information.
Answer: A, C
QUESTION: 109
You have just installed Hitachi Dynamic Link Manager (HDLM) on a Sun Solaris
server. What is the purpose of running the "dlnkmgr view -sys" command?
A. It displays the configuration.
B. It displays the primary path.
C. It displays the alternate path.
D. It configures the alternate path.
Answer: A
QUESTION: 110
A VSP customer is attaching new SUSE Linux servers to their SAN. What are two
configuration requirements? (Choose two.)
A. The queue depth per VSP LUN must not exceed 32.
B. The queue depth per VSP LUN must be at least 8.
C. The queue depth per VSP port must not exceed 2048.
D. The queue depth per VSP port must not exceed 1024.
Answer: A, C
QUESTION: 111
Which two products can be used to monitor the Hitachi Dynamic Provisioning
(HDP) Pool capacity on a VSP? (Choose two.)
A. Device Manager
B. Storage Navigator
C. Provisioning Manager
D. Replication Manager
Answer: A, B
QUESTION: 112
A customer is using an AMS 2300 system as external storage behind a VSP. They
are reworking the power distribution and need to power down both storage systems.
What is the correct sequence of actions?
A. Stop the host I/O > power off the VSP > power off the AMS 2300.
B. Stop the host I/O > power off the AMS 2300 > power off the VSP.
C. Perform a path disconnect to the AMS 2300 > stop the host I/O > power off the
AMS 2300 > power off the VSP.
D. Stop the host I/O > perform a path disconnect to the AMS 2300 > allow the
storage systems to go to battery backup mode when the power is
disconnected.
Answer: A
QUESTION: 113
What are two valid locations for the Dynamic Mapping table of Dynamic
Provisioning? (Choose two.)
A. in flash memory
B. in one of the pool volumes
C. in cache memory
D. in shared memory
Answer: B, D
QUESTION: 114
Which three steps should be performed during a new VSP installation? (Choose
three.)
A. Install HiTrack Monitor on a customer server and configure it.
B. Set the battery date for each battery.
C. Install all SSVP jumpers.
D. Connect the CE laptop to the Console LAN connection port on the SVP.
E. Dump the final configuration and upload it to TUF.
Answer: B, D, E
QUESTION: 115
You are installing a VSP with 2 DKCs. Which component makes up the
interconnection for data paths?
A. SVP
B. DKA
C. VSD
D. ESW
Answer: D
QUESTION: 116
You have replaced a part on a VSP. What are three mandatory steps to complete
your maintenance task? (Choose three.)
A. Complete the "Last maintenance" form inside the DKC door.
B. Complete the corresponding SIM(s).
C. Reboot the SVP to renew the configuration.
D. Check the maintenance screen for any blinking parts.
E. Set the SVP application back to View Mode.
Answer: B, D, E
QUESTION: 117
The SVP has failed on a VSP and you have ordered a replacement. Which
functionality is still available while waiting for the new SVP to arrive on site?
A. Configuration changes can be made using raidcom commands.
B. Hitrack can continue monitoring the VSP and report errors.
C. Configuration changes can be made using HiCommand CLI.
D. ShadowImage pairs can be managed with RAID Manager/CCI.
Answer: D
QUESTION: 118
Why will a server in an environment using persistent binding maintain a constant
view of its target IDs when rebooted?
A. Because persistent binding retains the target ID information.
B. Because the storage LUN Management Service will manage the target IDs.
C. Because the driver software remaps the SCSI target IDs to the new WWNNs
automatically.
D. Because persistent binding will connect to the LUN Manager and provide the
target IDs.
Answer: A
QUESTION: 119
Which two operations are supported by the Tiered Storage Manager GUI? (Choose
two.)
A. initiate an automatic migration based on performance bottlenecks
B. migrate an external volume to a pool
C. migrate a TrueCopy P-Vol in status PAIR
D. migrate a Journal Volume of Universal Replicator
Answer: B, C
QUESTION: 120
What is the benefit of installing an additional pair of disk adapters (DKA) on a
VSP?
A. It increases the total number of disk drives that can be installed.
B. It allows intermix of 2,5" and 3,5" disk drives.
C. It increases throughput on the existing SAS links.
D. It increases the number of SAS links.
Answer: D

User: Ruby***** I used a combination of books and my years of experience to prepare for the hh0-210 exam. However, the Killexams.com prep unit proved to be the most valuable resource, as the questions were exactly what I saw in the exam. I scored 89% in my hh0-210 exam, and I highly recommend Killexams.com Questions and Answers and exam Simulator to anyone preparing for this challenging exam.

User: Rina***** I am grateful to killexams.com for their helpful study materials, which aided me in attaining a score of 79% on the HH0-210 exam. Their resources were instrumental in my success, and I owe them a big thank you.

User: Ben***** After preparing with the killexams.com set for a few days, I passed the HH0-210 exam. I am relieved to leave it behind but happy that I found killexams.com to help me get through this exam. The questions and answers were correct, and they were taken from the actual HH0-210 exam, making things a lot easier for me. Thanks to killexams.com, I got a score that was somewhat higher than I had hoped for.

User: Emmanuel***** I used to be skeptical about online resources, but killexams.com changed my perception. Unlike other unreliable sources, they provided me with accurate and substantial material for my hh0-210 exam preparation. Thanks to their resources, I passed the exam on my second attempt with an impressive 87% score. Their materials were a game-changer for me.

User: Stesha***** I am proud to say that I have passed the HH0-210 exam. All the questions on the exam were from Killexams.com. It was a real help for me on the HH0-210 exam, and all my achievement goes to this guide. With the help of this test material, I was proficient enough to attempt all the questions in the HH0-210 exam. The exam preparation material led me in the right direction and guaranteed 100% success in the exam.

---