HPE0-S59 : HPE Compute Solutions Exam

HPE0-S59 Dumps
HPE0-S59 Braindumps
HPE0-S59 Real Questions
HPE0-S59 Practice Test
HPE0-S59 Actual Questions


HP
HPE0-S59
HPE Compute Solutions
https://killexams.com/pass4sure/exam-detail/HPE0-S59
Question: 103
Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are
equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.
Which statement about mixing different FLM modules is true?
A. Existing 2-port FLM modules must be replaced with 4-port FLM modules
B. A management ring can contain mixed frame link module configurations
C. A management ring with mixed FLM modules cannot have more than 12 frames
D. Mixing different FLM modules is allowed if all of them have the same firmware version
Answer: B
Question: 104
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
A. To use all compute nodes, the customer must create at least two logical enclosures
B. To manage all frames, the customer must buy two additional HPE Composer 2 modules
C. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
D. The customer can add one D3940 storage Module to each of the frames
Answer: C
Question: 105
Which statement about manual orchestration during the firmware update is true?
A. It is supported only for logical enclosures with at least three frames
B. It provides an ability to select and update one side of the Interconnect topology at a time
C. It provides the ability to install an older firmware version than currently Installed In the interconnect
D. It allows all the interconnect modules to be activated manually at the same time.
Answer: B
Question: 106
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network
is not available.
What must be done to fix this issue?
A. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is
reached.
B. To make this network available to use in the server profile, the customer must enable the Smart Link feature within
network definition.
C. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration
must be updated from the LI
D. Check within the server profile which server hardware is used and perform the Refresh operation on this compute
node to get the latest adapter information.
Answer: C
Question: 107
Refer to the exhibit.



Which statement about this logical interconnect group is true?
A. The master modules are located in the interconnect bays 2 and 5
B. For the given downlink speed, the maximum number of frames is reached
C. Both master modules are located in the same HPE S ynergy frame
D. To use interconnect bay set 3, all compute nodes must be half-height
Answer: C
Question: 108
Which compute node parameters are captured within server hardware type?
A. Number of the CPUs
B. installed operating system
C. Mezzanine card configuration
D. Size of the memory Installed
Answer: C
Question: 109
Which statement about login redistribution is true?
A. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy
frame
B. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
C. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
D. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
Answer: C
Question: 110
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login
prompt displays
Where should you start the troubleshooting process?
A. At the iLO interface to verify whether the ILO Advanced license is properly applied
B. At HPE OneView Interface to verify whether the server is In the maintenance mode
C. At the iLO interface to verify whether the SSO certificate is removed from an iL
D. At HPE OneView Interface to verify whether the iLO processor is disabled
Answer: A
Question: 111
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?
A. It is equipped with HPE Persistent memory by default
B. It can support a single processor only and up to 4 per chassis
C. It is fully managed using HPE OneView including all connections
D. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
Answer: D
Question: 112
You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which
interconnects are required to support this connection? (Select two.)
A. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
B. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
C. HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy
D. HPE Virtual Connect SE 32Gb FC Module for HPE Synergy
E. Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy
F. Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy
Answer: A,B,D
Question: 113
DRAG DROP
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.

Answer: A,B,D
Question: 114
A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?
A. Brocade 32GB Fibre Channel Switch Module for HPE Synergy
B. HPE virtual Connect SE 32 Gb FC Module for Synergy
C. HPE Virtual Connect SE 100 Gb F32 Module tor Synergy
D. HPE Synergy 12 Gb SAS Connection Module
Answer: C
Question: 115
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy
480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and
two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?
A. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
B. For Brocade switches, a logical interconnect group must be created in HPE OneView.
C. For VC-FC modules, all of server facing ports must be property licensed.
D. SAS switches must be moved to second fabric and FC modules Installed in the first one.
Answer: D
Question: 116
Which statement about the HPE D3940 storage module is true?
A. SATA drives requires redundant 10 adapters to be installed in this module
B. Up to five modules can be installed in a single frame with Gen10 servers
C. it is configured through CLl available from HPE Synergy console
D. Only one type of drives (SATA, SAS, SSD) can be installed in each module
Answer: C
Question: 117
Which statement about HPE Superdome Flex 280 is true?
A. It supports 2 to 8 sockets in 2-socket increments.
B. it cannot be managed using HPE OneView.
C. It must be equipped with at least 768 GB of memory.
D. It can support up to two nPars with an external RM
Answer: A
Question: 118
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance
updated.
A. HPE Composer Maintenance Console
B. HPE OneView Update Readiness Checker
C. HPE OneView Global Dashboard
D. HPE OneView Firmware Compliance Report
Answer: B
Question: 119
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which
components must be included in the proposal to meet the customerâs needs?
A. Rack Management Controller for nPar management
B. HPE Superdome Flex Grid licenses enabling connectivity between chassis
C. At least Tour HPE Persistent Memory DIMMs per nPar
D. One base chassis and three expansion chassis with licenses
Answer: D

User: Ammar***** I am not a fan of online practice tests, but I am a permanent user of Killexams.com. This organization provides valid question answers that help you pass your exam easily. Thats how I passed the HPE0-S59 exam. The first time, I relied on loose online stuff and failed. However, I passed the second time using the Killexams.com HPE0-S59 exam simulator. Thank you, Killexams.com.

User: Sasha***** I found Killexams.com to be a great solution to all my exam-related problems. The lengthy questions and answers that once seemed like an insurmountable obstacle were no longer a problem, as the concise format made my preparation for the HPE0-S59 exam an enjoyable experience. I passed this exam with a score of 79%, without any difficulty or stress, thanks to the effortless manner in which Killexams.com presented the material. The questions and answers provided by Killexams.com are an excellent resource for anyone preparing for this exam, and I am grateful for their assistance. Even long after the exam was over, I continued to think about their help in making the difficult topic of motivating and reinforcing novices so easy to understand.

User: Zakhar***** At the suggestion of a friend, I subscribed to Killexams.com for some extra assistance in preparing for my hpe0-s59 exams. As soon as I logged on to Killexams.com, I felt relaxed and relieved, as I knew that it would help me get through my hpe0-s59 exam, and it did.

User: Nancy***** I used the practice test from Killexams.com, and it made my hpe0-s59 exam smoother. The quality of the material was impressive, and I was able to pass the exam.

User: Colleen***** Before I walked into the testing center for the hpe0-s59 exam, I was confident in my preparation. killexams.com had been a tremendous help, and I felt that I would ace the test. I was able to achieve good scores thanks to their assistance.

---